What are the specs for this Control Board?

The correct replacement for Tempstar model T4H360GKD100 — OEM 1173636 | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4H360GKD100 — OEM 1173636 | Ships Today.

Is this control board compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Defrost Control Board for T4H360GKD100 — OEM 1173636 | Ships Today

Name: Tempstar Defrost Control Board for T4H360GKD100 — OEM 1173636 | Ships Today
Brand: Tempstar
SKU: 1173636-GEN
Price: 149.00 USD
Availability: InStock

SKU: 1173636-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

The OEM Tempstar Defrost Control Board (part number 1173636) is the brain of your T4H360GKD100 heat pump's defrost cycle. It monitors coil temperature and run time, then commands the reversing valve and auxiliary heat to clear frost from the outdoor coil during cold-weather operation. A failed defrost board is one of the most common causes of a heat pump that freezes over, blows cold air on heat mode, or short-cycles. This board uses 24V control logic and plugs into the existing harness for a direct OEM replacement — no rewiring or reprogramming required.

Specifications

Spec	Value
Part Number	1173636
Type	Defrost Control Board
Brand	Tempstar (ICP/Heil)
Control Voltage	24V
Fits Model	T4H360GKD100
Fitment	OEM Direct Replacement

Compatibility

This board is the factory-specified control for the Tempstar T4H360GKD100 heat pump and is shared across many ICP-family (Heil, Comfortmaker, Carrier-built ICP) units that use the 1173636 board. Always verify the part number on your existing board before ordering.

Installation Guide

Safety First — Disconnect power at the breaker and verify zero voltage with a multimeter.
Access — Remove the outdoor unit's service panel.
Document — Photograph every wire and connector on the board before disconnecting.
Remove — Unplug the low-voltage and sensor connectors, release the mounting standoffs, and lift out the old board.
Install — Snap the new board onto the standoffs and reconnect every lead exactly per your photo.
Test — Restore power and run a defrost test cycle to confirm proper sequencing.

Signs You Need a Replacement

Outdoor coil ices over and never defrosts
Heat pump blows cold air in heat mode
Unit short-cycles or won't switch into defrost
Visible burn marks or failed relays on the board

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Defrost Control Board f...

$149.00

Frequently Asked Questions

Does this Control Board fit my Tempstar T4H360GKD100 — OEM 1173636 | Ships Today?

Yes. This is the factory-specified OEM control board for the Tempstar T4H360GKD100 — OEM 1173636 | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my Tempstar T4H360GKD100 — OEM 1173636 | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu