What are the specs for this Control Board?

The correct replacement for Tempstar model T4H342GKE200 — Heat Pump | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4H342GKE200 — Heat Pump | Ships Today.

Is this control board compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Defrost Control Board for T4H342GKE200 — Heat Pump | Ships Today

Name: Tempstar Defrost Control Board for T4H342GKE200 — Heat Pump | Ships Today
Brand: Tempstar
SKU: 1173636-GEN
Price: 125.00 USD
Availability: InStock

SKU: 1173636-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM defrost control board (part 1173636) manages the defrost cycle on the Tempstar T4H342GKE200 heat pump. It watches the outdoor coil temperature sensor and run time, then commands the reversing valve and cycles the outdoor fan off to clear frost from the coil in cold weather. When the board fails, the outdoor coil ices over, heating capacity drops, and the unit can fault on high pressure.

Specifications

Spec	Value
OEM Part Number	1173636
Type	Defrost Control Board
Brand	Tempstar / Heil / ICP
Control Voltage	24V
Function	Defrost timing, reversing valve, fan control
Application	Heat Pump
Fits Model	T4H342GKE200

Compatibility

Direct OEM replacement for the Tempstar T4H342GKE200 and matching ICP-family heat pumps (Heil, Comfortmaker, ICP) using defrost board 1173636. Match the part number and connector layout to your existing board before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the condenser control-panel cover.
Document — Photograph every wire harness and the defrost timing pin/jumper setting.
Remove — Unplug connectors, release the board standoffs, and lift the old board out.
Install — Seat the new board on the standoffs, reconnect each harness, and set the defrost timing pin to match the original.
Test — Restore power and confirm normal heat-pump operation and defrost initiation.

Signs You Need a Replacement

Outdoor coil ices up and never defrosts
Heat pump won't switch to defrost or stays in defrost
No 24V output to the reversing valve or fan
Visible burn marks, scorched traces, or a failed relay on the board

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on uninstalled parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Defrost Control Board f...

$125.00

Frequently Asked Questions

Does this Control Board fit my Tempstar T4H342GKE200 — Heat Pump | Ships Today?

Yes. This is the factory-specified OEM control board for the Tempstar T4H342GKE200 — Heat Pump | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the control board on my Tempstar T4H342GKE200 — Heat Pump | Ships Today?

Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.

My HVAC system is completely dead. What could be wrong?

Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.

Is this control board compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar control board?

OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu