Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar Defrost Control Board for T4H342GKD200 — Heat Pump Timer Board | Ships Today
Tempstar

Tempstar Defrost Control Board for T4H342GKD200 — Heat Pump Timer Board | Ships Today

SKU: 1173636-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the genuine OEM Defrost Control Board (OEM Part #1173636) for the Tempstar T4H342GKD200 heat pump. In heat-pump mode the outdoor coil accumulates frost; the defrost board monitors coil temperature and run time, then periodically energizes the reversing valve to run a defrost cycle that melts the ice off the outdoor coil. It coordinates the compressor, condenser fan, reversing-valve coil, and auxiliary/emergency heat during defrost. A failed defrost board causes the most expensive and confusing heat-pump symptoms: a coil that ices over solid, defrost cycles that never start or never end, or auxiliary heat that runs constantly and spikes the electric bill.

Specifications

Spec Value
OEM Part Number 1173636
Type Defrost Control Board
Brand Tempstar (ICP / Heil family)
Control Voltage 24V
Function Defrost timing, reversing valve & fan control
Application Heat Pump Condensing Unit
Fitment OEM Direct Replacement

Compatibility

Direct OEM replacement for the Tempstar T4H342GKD200 heat pump and ICP-built Heil, Comfortmaker, and Carrier/Bryant private-label heat pumps using this defrost board. Match part number 1173636 and the connector layout to your existing board before installing.

Installation Guide

  1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
  2. Access — Remove the condensing unit control-panel cover to expose the board.
  3. Document — Photograph every wire harness, plug, and the defrost-timer pin setting before disconnecting.
  4. Remove — Unplug each connector, release the standoffs/screws, and lift the old board out.
  5. Install — Seat the new board on its standoffs, match the defrost-time jumper/pin to the original, and reconnect every harness per your photo.
  6. Test — Restore power, run a heating call, and confirm normal operation; initiate a forced defrost to verify the reversing valve and fan respond.

Signs You Need a Replacement

  • Outdoor coil ices over and never defrosts
  • Defrost cycle runs constantly or won't terminate
  • Auxiliary/emergency heat runs nonstop, driving high bills
  • No reversing-valve or fan response during a defrost call; visible board damage or burnt relays

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Control Board fit my Tempstar T4H342GKD200 — Heat Pump Timer Board | Ships Today?
Yes. This is the factory-specified OEM control board for the Tempstar T4H342GKD200 — Heat Pump Timer Board | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the control board on my Tempstar T4H342GKD200 — Heat Pump Timer Board | Ships Today?
Difficulty: Advanced (1–2 hrs)
Step 1: Turn off breaker. Step 2: PHOTOGRAPH all wire connections before touching anything. Step 3: Label each wire with tape. Step 4: Disconnect all wires, remove old board. Step 5: Mount new board, reconnect all wires matching your photo exactly. Step 6: Restore power and test all modes. Exact part number match is critical.
My HVAC system is completely dead. What could be wrong?
Completely dead HVAC (no LED on board) = failed control board or blown fuse. Check board fuse first (3A or 5A, costs $1–$5). If fuse is good and board has power but no LED, board is dead. Always photograph wiring before replacing.
Is this control board compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar control board?
OEM essential. Control boards are model-specific with precise firmware and connector layouts. Aftermarket boards rarely match all functions and can cause intermittent failures or safety issues. Always match the exact OEM part number.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online