What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Contactor for TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today

Name: Tempstar Contactor for TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today
Brand: Tempstar
SKU: 1050839-GEN
Price: 24.95 USD
Availability: InStock

SKU: 1050839-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite purpose contactor (part #1050839) for the Tempstar TCH042AKA2 heat pump. The contactor is the electrically operated switch that energizes the compressor and condenser fan motor every time your thermostat calls for cooling or heat-pump operation. A 24-volt control signal pulls in the magnetic coil, closing a 35-amp line-voltage contact to power the outdoor unit. Because it cycles thousands of times per season, the contacts pit, burn, and weld over time. Common failure symptoms include a unit that won't start, a loud chattering or buzzing hum at the outdoor disconnect, contacts that stick closed so the compressor never shuts off, or visible arcing and burnt terminals. Replacing a worn contactor is one of the most common and cost-effective HVAC repairs.

Specifications

Spec	Value
Part Number	1050839
Type	Definite Purpose Contactor, 1-Pole
Brand	Tempstar (ICP / Heil)
Contact Rating	35 Amps
Coil Voltage	24 VAC
Poles	1
Fits Model	TCH042AKA2

Compatibility

Engineered as a direct-fit replacement for the Tempstar TCH042AKA2 condensing unit. This contactor is also widely used across ICP-family equipment, including Heil, Comfortmaker, Arcoaire, and Keeprite outdoor units that originally shipped with a 1-pole 35A 24V contactor. Always verify your existing contactor's pole count, amp rating, and coil voltage before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and the breaker, then verify zero voltage with a multimeter across the line terminals.
Access — Remove the service panel from the condensing unit to expose the contactor.
Document — Take a clear photo of every wire and terminal before disconnecting anything.
Remove — Label and disconnect the line, load, and 24V coil wires, then unbolt the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire exactly as photographed.
Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly with no chatter and the compressor and fan energize.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor won't start
Contacts are pitted, burnt, or welded closed (unit runs nonstop)
Visible arcing or melted terminals on the contactor
Intermittent cooling or the unit short-cycling

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Contactor for TCH042AKA...

$24.95

Frequently Asked Questions

Does this Contactor fit my Tempstar TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TCH042AKA2 — 1-Pole 35A 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu