What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Contactor for TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today

Name: Tempstar Contactor for TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today
Brand: Tempstar
SKU: 1059574-GEN
Price: 32.00 USD
Availability: InStock

SKU: 1059574-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole definite purpose contactor (part #1059574) is the primary switching relay for the Tempstar TCA060AKA1 condensing unit. When the thermostat calls for cooling, the 24V control circuit energizes the contactor coil, pulling the contacts closed to deliver line voltage to the compressor and condenser fan motor. Rated at 40 amps per pole with a 24-volt coil, it is built to handle the high inrush current of compressor startups thousands of times over its service life. Common failure symptoms include a system that won't start, a chattering or buzzing noise at the contactor, pitted or welded contacts, or a unit that runs intermittently. Because the contactor carries full load current every cooling cycle, the contacts gradually erode and eventually fail to make clean connection.

Specifications

Spec	Value
Part Number	1059574
Type	Definite Purpose Contactor
Brand	Tempstar
Poles	2
Contact Rating	40 Amps
Coil Voltage	24V
Fits Model	TCA060AKA1

Compatibility

Engineered as a direct OEM replacement for the Tempstar TCA060AKA1 condenser. Equivalent contactors are also used across ICP-family equipment (Heil, Comfortmaker, Arcoaire) sharing the same chassis. Always verify the existing contactor's amp rating, pole count, and 24V coil before installation.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and main breaker, then verify zero voltage with a multimeter.
Access — Remove the condenser service panel to expose the electrical compartment.
Document — Photograph all wire connections before disconnecting anything.
Remove — Label and disconnect the line, load, and 24V coil leads, then unscrew the old contactor from its bracket.
Install — Mount the new contactor, reconnect each wire to the matching terminal per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call and the compressor/fan energize.

Signs You Need a Replacement

Loud buzzing, humming, or chattering from the contactor.
Burned, pitted, or welded contact points.
Compressor and fan fail to start despite a 24V signal.
Unit short-cycles or runs intermittently.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Contactor for TCA060AKA...

$32.00

Frequently Asked Questions

Does this Contactor fit my Tempstar TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TCA060AKA1 — 2-Pole 40A 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu