Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar Contactor for T4H324GKA200 — 1-Pole 30A 24V Coil | Ships Today
Tempstar

Tempstar Contactor for T4H324GKA200 — 1-Pole 30A 24V Coil | Ships Today

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This OEM single-pole definite purpose contactor (part #1172472) is the electrical switch that powers the compressor and outdoor fan motor in your Tempstar T4H324GKA200 heat pump. When the thermostat calls for cooling or heating, the 24V control coil energizes and pulls the main contacts closed, sending line voltage to the condensing unit. This contactor is rated for 30 amps, uses a 24-volt coil, and includes a shunt for proper line-side connection. A failed contactor is one of the most common no-cool/no-heat service calls — symptoms include a unit that hums but won't start, pitted or welded contacts, chattering, or a complete failure to engage when the thermostat calls.

Specifications

Spec Value
Part Number 1172472
Type Definite Purpose Contactor
Brand Tempstar (OEM)
Poles 1 (Single-Pole)
Contact Rating 30 Amps
Coil Voltage 24 VAC
Features Shunt-equipped

Compatibility

Engineered as the OEM replacement for the Tempstar T4H324GKA200 heat pump. The same 1-pole 30A/24V form factor is widely shared across ICP-family condensing units (Heil, Comfortmaker, Arcoaire, Keeprite). Always confirm coil voltage and amp rating against your existing part before installing.

Installation Guide

  1. Safety First — Disconnect power at the outdoor disconnect and breaker; verify zero voltage at the contactor terminals with a multimeter.
  2. Access — Remove the condensing unit's electrical access panel.
  3. Document — Photograph every wire and terminal position before disconnecting anything.
  4. Remove — Note the line, load, and 24V coil leads, then transfer wires one at a time from the old contactor and unscrew it from the mounting bracket.
  5. Install — Mount the new contactor, then reconnect each wire to the matching terminal per your photo.
  6. Test — Restore power and call for cooling; confirm the contacts pull in cleanly and the compressor and fan start.

Signs You Need a Replacement

  • Outdoor unit hums or buzzes but the compressor won't start
  • Burnt, pitted, or welded-together contacts
  • Audible chattering when the thermostat calls
  • Intermittent cooling or a unit that won't shut off (stuck contacts)

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Tempstar T4H324GKA200 — 1-Pole 30A 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the Tempstar T4H324GKA200 — 1-Pole 30A 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Tempstar T4H324GKA200 — 1-Pole 30A 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online