What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Contactor for T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today

Name: Tempstar Contactor for T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 32.00 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole contactor (part number 1172472) for the Tempstar T4A418GKA200 condensing unit. The contactor is a 1-pole, 30-amp electromechanical relay with a 24-volt control coil and an integrated auxiliary shunt. Its job is simple but critical: when the thermostat calls for cooling, the 24V coil energizes and pulls the contacts closed, sending line voltage to the compressor and condenser fan motor. When a contactor fails, the entire outdoor unit goes dead — even though the indoor blower and thermostat may still operate normally. Common failure modes include pitted or welded contacts, a burned-out coil, chattering, or insects and debris lodged in the contact gap. Because it switches high current thousands of times per season, the contactor is one of the most frequently replaced components in any split-system air conditioner.

Specifications

Spec	Value
OEM Part Number	1172472
Type	Definite Purpose Contactor, with shunt
Brand	Tempstar
Poles	1 (Single-Pole)
Contact Rating	30 Amps
Coil Voltage	24 VAC
Fits Model	T4A418GKA200

Compatibility

This contactor is the factory-specified replacement for the Tempstar T4A418GKA200 air conditioner and is shared across many ICP-family (Tempstar, Heil, Comfortmaker) condensing units that use OEM part 1172472. Always confirm the part number printed on your existing contactor before ordering.

Installation Guide

Safety First – Disconnect power at the outdoor disconnect and the breaker, then verify zero voltage with a multimeter across the line terminals.
Access – Remove the condenser unit service panel to expose the control compartment.
Document – Photograph every wire on the existing contactor before disconnecting anything.
Remove – Pull the line, load, and 24V coil wires off the spade terminals, then unscrew the contactor from the mounting bracket.
Install – Mount the new contactor, reconnect each wire exactly as photographed, including the shunt lead.
Test – Restore power and confirm the contacts pull in on a cooling call and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit is silent while the thermostat calls for cooling.
Loud humming or buzzing from the condenser without the compressor starting.
Visibly pitted, burned, or welded contacts.
Contactor chatters or fails to pull in fully.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Contactor for T4A418GKA...

$32.00

Frequently Asked Questions

Does this Contactor fit my Tempstar T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T4A418GKA200 – 1-Pole 30A 24V w/ Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu