What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Contactor for T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today

Name: Tempstar Contactor for T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 34.00 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM 1-pole contactor (part number 1172472) is the primary switching relay for the Tempstar T2A348GKA100 outdoor condensing unit. Rated at 30 amps with a 24V control coil and a built-in shunt, it closes to deliver line voltage to the compressor and condenser fan motor each time the thermostat calls for cooling. Because the contactor cycles thousands of times per season, its silver contact points eventually arc, pit, and corrode until they no longer carry full current. A worn contactor leads to a condenser that hums without starting, intermittent cooling, or a unit that stays running after the call ends. Installing a fresh OEM contactor restores clean, full-voltage switching and safeguards the compressor from low-voltage and chatter damage.

Specifications

Spec	Value
OEM Part Number	1172472
Type	Definite Purpose Contactor
Poles	1 (Single Pole)
Contact Rating	30 Amps
Coil Voltage	24 VAC
Feature	With Shunt
Brand	Tempstar

Compatibility

Fits the Tempstar T2A348GKA100 condensing unit and other ICP/Tempstar-family models (Heil, Comfortmaker) that use the 1172472 single-pole contactor. Confirm pole count, amperage, and coil voltage against your current part before ordering.

Installation Guide

Safety First — Pull the outdoor disconnect and shut off the breaker, then verify zero voltage at the terminals with a multimeter.
Access — Remove the condenser service panel to reach the control box.
Document — Take a clear photo of every wire connection before you begin.
Remove — Transfer the line, load, and 24V coil wires off the old contactor one at a time, then unbolt it.
Install — Secure the new contactor to the bracket and reconnect each wire to its matching terminal.
Test — Restore power, call for cooling, and verify the contactor energizes and the unit starts.

Signs You Need a Replacement

Buzzing or humming at the condenser with no compressor start.
Burned, pitted, or melted contact surfaces.
Unit continues running after the thermostat is satisfied.
Rapid chattering or clicking on a cooling call.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Contactor for T2A348GKA...

$34.00

Frequently Asked Questions

Does this Contactor fit my Tempstar T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T2A348GKA100 — 1-Pole 30A 24V w/Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu