What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar Contactor for T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today

Name: Tempstar Contactor for T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 32.95 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite-purpose contactor (Tempstar part #1172472) for the Tempstar T2A336GKB200 condensing unit. Rated at 30 amps with a 24-volt control coil and an integrated shunt, this contactor is the electrical switch that energizes the compressor and condenser fan motor on every call for cooling. The 24V coil pulls the line-voltage contacts closed to power the outdoor unit. Because the contacts close under high inrush current each cycle, they gradually pit, burn, and can weld shut — making the contactor one of the most common failure points in an outdoor unit. Symptoms of a worn contactor include humming without starting, chattering, or a unit that won't shut off. This inexpensive OEM replacement restores clean, full-power switching.

Specifications

Spec	Value
OEM Part Number	1172472
Type	Definite Purpose Contactor, 1-Pole
Brand	Tempstar
Contact Rating	30 Amps
Coil Voltage	24 VAC
Poles	1
Features	Integrated Shunt
Fitment	OEM Direct Replacement

Compatibility

This contactor is the factory-specified replacement for the Tempstar T2A336GKB200 air conditioner / heat pump condensing unit. As an ICP-family part (Tempstar, Heil, Comfortmaker, and related brands share componentry), it also services many comparable outdoor units that shipped with a 30A single-pole, 24V-coil contactor. Confirm your existing contactor's amp rating, pole count, and coil voltage against the specs above before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and the breaker. Verify zero voltage at the contactor terminals with a multimeter before touching anything.
Access — Remove the electrical service panel on the condensing unit to expose the contactor.
Document — Photograph every wire and terminal location before disconnecting. Note line, load, and coil connections.
Remove — Transfer wires one at a time to the new contactor, or label and remove them, then unscrew the old contactor from its bracket.
Install — Mount the new contactor, reconnect all line, load, and 24V coil wires exactly per your photo. Confirm tight terminal screws.
Test — Restore power and call for cooling. Confirm the contacts pull in cleanly and the compressor and fan start without chatter.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor and fan won't start.
Burned, pitted, or welded contact points (unit won't shut off).
Audible chattering or rapid clicking from the contactor.
Visible arcing, melted housing, or insect/debris fouling between contacts.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee — if it doesn't fit your model, we'll make it right.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar Contactor for T2A336GKB...

$32.95

Frequently Asked Questions

Does this Contactor fit my Tempstar T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T2A336GKB200 — 1-Pole 30A 24V w/Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu