Tempstar Condenser Fan Motor for T2H360GKD200 — 1/4 HP | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This is the genuine OEM 1/4 HP condenser fan motor (part number 1177473) for the Tempstar T2H360GKD200 heat pump. The condenser fan motor drives the outdoor fan blade that pulls air across the condenser coil, rejecting heat from the refrigerant so the system can cool — and, in heat-pump mode, absorb heat. When this motor fails, head pressure climbs, the compressor overheats and trips on thermal overload, and cooling capacity collapses. Common failure signs include a fan that hums but won't spin, bearings that screech or grind, a motor that runs hot enough to trip on its internal overload, or a unit that short-cycles on high-pressure faults. Replacing a worn motor promptly protects the far more expensive compressor downstream.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1177473 |
| Type | Condenser Fan Motor |
| Brand | Tempstar (ICP / Heil) |
| Horsepower | 1/4 HP |
| Application | Outdoor condenser fan |
| Fit | OEM direct replacement |
Compatibility
Engineered as a direct-fit replacement for the Tempstar T2H360GKD200. Because ICP, Heil, Tempstar, and Comfortmaker share platforms, this 1/4 HP condenser motor also services many equivalent T2H-series heat pumps built on the same outdoor section. Always confirm horsepower, rotation, voltage, and shaft diameter against the motor you are removing before installing.
Installation Guide
- Safety First — Disconnect power at the outdoor disconnect and verify zero voltage with a multimeter at the contactor.
- Access — Remove the top grille/fan shroud screws and lift the fan assembly clear of the cabinet.
- Document — Photograph all motor wires, capacitor terminals, and the blade position on the shaft before disconnecting.
- Remove — Loosen the fan blade set screw, pull the blade, then unbolt the old motor from the shroud and free its leads.
- Install — Mount the new motor to the shroud, reinstall the blade at the same shaft depth, and reconnect leads and the run capacitor exactly as photographed.
- Test — Restore power, confirm correct rotation and smooth start, and verify the fan reaches full speed with no vibration.
Signs You Need a Replacement
- Fan hums or buzzes but the blade will not turn freely.
- Loud bearing screech, grinding, or wobble during operation.
- Outdoor unit trips on high-pressure or thermal overload.
- Motor body is too hot to touch or smells of burnt insulation.
Shipping & Returns
Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days