Tempstar Condenser Fan Motor 1/4 HP 825 RPM for TCA760GKB101 — OEM 1184599 | Ships Today
OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
Overview
This genuine OEM condenser fan motor (part number 1184599) drives the outdoor fan on the Tempstar TCA760GKB101 condensing unit. Rated at 1/4 HP and 825 RPM, the motor spins the condenser fan blade to pull air across the coil and reject heat from the refrigerant. When this motor fails, the system loses its ability to shed heat: head pressure climbs, the compressor overheats and may trip on its internal overload, and cooling capacity drops or stops entirely. Typical failure signs are a fan that won't start or starts slowly, a motor that runs hot and cycles off, grinding or screeching bearings, and a condenser that trips the high-pressure switch. A motor that spins freely but won't run usually points to the motor or its run capacitor.
Specifications
| Spec | Value |
|---|---|
| Part Number | 1184599 |
| Type | Condenser Fan Motor |
| Brand | Tempstar |
| Horsepower | 1/4 HP |
| Speed | 825 RPM |
| Fits Model | TCA760GKB101 |
Compatibility
Direct OEM replacement for the Tempstar TCA760GKB101 air conditioning condenser. Confirm horsepower, RPM, rotation direction, shaft size, and capacitor rating against your original motor before installing.
Installation Guide
- Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter.
- Access — Remove the top grille or fan shroud to lift out the motor and blade assembly.
- Document — Photograph the wiring, motor rotation, and blade position/depth on the shaft before disconnecting.
- Remove — Loosen the blade set screw, pull the blade, disconnect the leads, and unbolt the old motor from its mount.
- Install — Mount the new motor, reinstall the blade at the same depth, and reconnect the leads (and run capacitor) per your photo.
- Test — Restore power, call for cooling, and confirm the fan spins in the correct direction at full speed.
Signs You Need a Replacement
- Condenser fan won't start or starts only with a manual push
- Grinding, screeching, or rumbling bearing noise
- Motor runs hot and cycles off on overload
- High head pressure and the compressor tripping out
Shipping & Returns
Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.
Shipping Information
- Orders placed before 3PM CST ship same business day
- Standard delivery: 2-5 business days
- Express shipping available at checkout
- Free shipping on orders over $75
- Tracking number emailed upon shipment
Return Policy
- 30-day returns on unused parts in original packaging
- Electrical parts (capacitors, contactors, control boards) are final sale once installed
- Email info@nationalhvacparts.com to initiate a return
- Refunds processed within 5-7 business days