Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar 40VA Transformer for T9MPD075F12A2 — 115V to 24V Control Transformer | Ships Today
Tempstar

Tempstar 40VA Transformer for T9MPD075F12A2 — 115V to 24V Control Transformer | Ships Today

SKU: 1012722-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is the OEM control transformer (OEM #1012722, "TRANS 115>24 40VA") for the Tempstar T9MPD075F12A2 gas furnace. The transformer steps incoming 115V line voltage down to the 24V low-voltage control circuit that powers the thermostat, control board logic, gas valve, and relays. Rated at 40VA, it supplies enough current for the furnace controls plus a typical thermostat and accessory load. When a transformer fails — commonly from a shorted secondary, a stuck contactor drawing excess current, or age — the entire 24V control system goes dead: the thermostat screen blanks, nothing energizes, and the furnace seems unresponsive even though line power is present. Because a blown transformer is often the symptom of a downstream short, inspect the low-voltage wiring before energizing the new part.

Specifications

Spec Value
Part Number 1012722
Type Control Transformer
Primary Voltage 115V
Secondary Voltage 24V
Rating 40VA
Brand Tempstar (ICP / Heil)
Fitment OEM

Compatibility

Built for the Tempstar T9MPD075F12A2 furnace and used across ICP-family equipment (Tempstar, Heil, Comfortmaker) that specifies the 1012722 40VA 115/24 transformer. Verify primary voltage and VA against your unit before installing.

Installation Guide

  1. Safety First — Disconnect furnace power at the breaker and confirm zero voltage with a multimeter.
  2. Access — Remove the control-compartment service panel.
  3. Document — Photograph the primary (line) and secondary (24V) wire connections before disconnecting.
  4. Remove — Disconnect the leads, remove the mounting screw or bracket, and take out the failed transformer.
  5. Install — Mount the new transformer, land the 115V primary and 24V secondary leads exactly per your photo, and confirm tight connections.
  6. Test — Restore power and verify 24V across the secondary; confirm the thermostat powers up and the furnace sequences normally.

Signs You Need a Replacement

  • Thermostat is blank and the furnace is completely dead despite line power.
  • No 24V reading at the control board or thermostat terminals.
  • Transformer is hot, buzzing, or shows scorch marks.
  • Furnace works intermittently then loses all control power.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Transformer fit my Tempstar T9MPD075F12A2 — 115V to 24V Control Transformer | Ships Today?
Yes. This is the factory-specified OEM transformer for the Tempstar T9MPD075F12A2 — 115V to 24V Control Transformer | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the transformer on my Tempstar T9MPD075F12A2 — 115V to 24V Control Transformer | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.
My thermostat has no power. What failed?
Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.
Is this transformer compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar transformer?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online