What are the specs for this Transformer?

The correct replacement for Tempstar model T8MPV100J20B1 — 115V to 24V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T8MPV100J20B1 — 115V to 24V | Ships Today.

Is this transformer compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 40VA Transformer for T8MPV100J20B1 — 115V to 24V | Ships Today

Name: Tempstar 40VA Transformer for T8MPV100J20B1 — 115V to 24V | Ships Today
Brand: Tempstar
SKU: 1172810-GEN
Price: 32.95 USD
Availability: InStock

SKU: 1172810-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM 40VA control transformer (part 1172810) for the Tempstar T8MPV100J20B1 gas furnace. It steps incoming 115V line voltage down to the 24V low-voltage power that runs the control board, thermostat, gas valve, and relays. A failed transformer — usually from a shorted thermostat wire or a stuck relay drawing excess current — kills the entire 24V control circuit, leaving the furnace unresponsive to a call for heat. A blown internal fuse or a discolored, burnt-smelling body are typical warning signs.

Specifications

Spec	Value
Part Number	1172810
Type	Step-Down Control Transformer
Brand	Tempstar / Heil / ICP
Rating	40 VA
Primary Voltage	115V
Secondary Voltage	24V

Compatibility

Fits the Tempstar T8MPV100J20B1 furnace and shared ICP/Heil platform models using a 40VA 115V-to-24V transformer. Verify the original part number before installing.

Installation Guide

Safety First — Disconnect power and verify zero voltage with a multimeter.
Access — Remove the control-compartment service panel.
Document — Photo all primary and secondary leads before disconnecting.
Remove — Label and disconnect the wires, then unbolt the old transformer from its bracket.
Install — Mount the new transformer and reconnect primary (115V) and secondary (24V) leads per your photo.
Test — Restore power, confirm 24V across the secondary, then run a heat cycle.

Signs You Need a Replacement

No 24V power — furnace completely unresponsive to the thermostat
Burnt smell or discolored transformer housing
Repeated blown low-voltage fuse on the control board
Measured secondary voltage well below 24V

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 40VA Transformer for T8...

$32.95

Frequently Asked Questions

Does this Transformer fit my Tempstar T8MPV100J20B1 — 115V to 24V | Ships Today?

Yes. This is the factory-specified OEM transformer for the Tempstar T8MPV100J20B1 — 115V to 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the transformer on my Tempstar T8MPV100J20B1 — 115V to 24V | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.

My thermostat has no power. What failed?

Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.

Is this transformer compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar transformer?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu