What are the specs for this Transformer?

The correct replacement for Tempstar model T8DNL075F16A1 — 115V to 24V | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T8DNL075F16A1 — 115V to 24V | Ships Today.

Is this transformer compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 40VA Transformer for T8DNL075F16A1 — 115V to 24V | Ships Today

Name: Tempstar 40VA Transformer for T8DNL075F16A1 — 115V to 24V | Ships Today
Brand: Tempstar
SKU: 1012722-GEN
Price: 26.95 USD
Availability: InStock

SKU: 1012722-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 40VA control transformer (part number 1012722, TRANS 115>24 40VA X) supplies low-voltage power for the Tempstar T8DNL075F16A1 gas furnace. It steps 115V line voltage down to the 24V required by the control board, thermostat, gas valve, and ignition circuit. A failed transformer leaves the entire low-voltage control system dead — no thermostat response, no ignition sequence, and no blower call. Transformer failure is often caused by a wiring short or a shorted 24V accessory, so inspect downstream wiring before replacing.

Specifications

Spec	Value
Part Number	1012722
Type	Step-Down Control Transformer
Brand	Tempstar (Heil / ICP family)
Rating	40 VA
Primary Voltage	115V
Secondary Voltage	24V
Fitment	OEM Replacement

Compatibility

Direct-fit OEM replacement for the Tempstar T8DNL075F16A1 gas furnace. Also fits comparable Heil, Comfortmaker, and ICP-family furnaces that use a 40VA 115V-to-24V control transformer. Confirm primary/secondary voltages and VA rating against your existing unit before installing.

Installation Guide

Safety First — Disconnect power at the furnace switch and breaker. Verify zero voltage with a multimeter before proceeding.
Access — Remove the furnace control/electrical access panel.
Document — Photograph the primary (line) and secondary (24V) wiring connections before disconnecting.
Remove — Disconnect the primary and secondary leads, remove the transformer mounting screws, and take out the old transformer.
Install — Mount the new transformer, reconnect the 115V primary and 24V secondary leads exactly per your photo, and verify no leads are pinched.
Test — Restore power, measure 24V at the secondary, and confirm the thermostat and ignition sequence respond.

Signs You Need a Replacement

No 24V at the control board or thermostat terminals
Furnace completely unresponsive to thermostat calls
Burnt smell or visible scorching on the transformer
Repeated blown low-voltage fuse after a confirmed short is cleared

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 40VA Transformer for T8...

$26.95

Frequently Asked Questions

Does this Transformer fit my Tempstar T8DNL075F16A1 — 115V to 24V | Ships Today?

Yes. This is the factory-specified OEM transformer for the Tempstar T8DNL075F16A1 — 115V to 24V | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the transformer on my Tempstar T8DNL075F16A1 — 115V to 24V | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Photo wiring connections. Step 3: Disconnect wires from old transformer. Step 4: Remove mounting hardware. Step 5: Install new transformer, reconnect wires matching voltage ratings. Step 6: Verify 24V output with multimeter.

My thermostat has no power. What failed?

Thermostat with no display = failed 24V transformer (or blown control board fuse). Check the 3A/5A fuse on the control board first ($1–$5 fix). If fuse is good but no 24V output from transformer, replace transformer.

Is this transformer compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar transformer?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu