What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TCH460AKC1 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TCH460AKC1 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 2-Pole 40A Contactor for TCH460AKC1 — 24V Coil | Ships Today

Name: Tempstar 2-Pole 40A Contactor for TCH460AKC1 — 24V Coil | Ships Today
Brand: Tempstar
SKU: 1059574-GEN
Price: 29.95 USD
Availability: InStock

SKU: 1059574-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM 2-pole, 40-amp definite purpose contactor (part #1059574) for the Tempstar TCH460AKC1 heat pump condensing unit. The contactor is an electrically operated switch that uses a 24-volt signal from the thermostat to close its 40A line-voltage contacts, energizing the compressor and condenser fan motor. When the call for cooling or heating ends, the 24V coil drops out and a spring opens the contacts to stop the unit. Because it switches on every run cycle, the contactor is one of the most frequently replaced components in outdoor HVAC equipment. Common failure symptoms include pitted or welded contacts that keep the unit running, a buzzing or chattering coil, a burnt housing, and a compressor that won't start despite a thermostat call.

Specifications

Spec	Value
OEM Part Number	1059574
Type	Definite Purpose Contactor
Brand	Tempstar (ICP / Heil)
Poles	2-Pole
Contact Rating	40 Amps
Coil Voltage	24 VAC
Fits Model	TCH460AKC1

Compatibility

This contactor is the factory-specified replacement for the Tempstar TCH460AKC1 outdoor unit. The same 2-pole 40A 24V contactor is used across many ICP-family condensers and heat pumps sold under the Tempstar, Heil, Comfortmaker, and ICP brands. Verify pole count, contact amperage, and 24V coil rating against your old part before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter before touching wiring.
Access — Remove the electrical/service panel on the condensing unit to expose the contactor.
Document — Photograph all line-voltage and 24V coil connections before disconnecting.
Remove — Disconnect the wires, release the mounting screws or clip, and remove the old contactor.
Install — Mount the new contactor in the same orientation and reconnect every wire per your photo, including the 24V coil leads.
Test — Restore power, call for cooling, and confirm the contacts pull in and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit won't shut off (welded contacts)
Buzzing or chattering from the contactor
Burnt, pitted, or corroded contacts and housing
Compressor and fan won't start on a cooling call

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 2-Pole 40A Contactor fo...

$29.95

Frequently Asked Questions

Does this Contactor fit my Tempstar TCH460AKC1 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TCH460AKC1 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TCH460AKC1 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu