What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T4H460GKB100 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4H460GKB100 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 2-Pole 40A Contactor for T4H460GKB100 — 24V Coil | Ships Today

Name: Tempstar 2-Pole 40A Contactor for T4H460GKB100 — 24V Coil | Ships Today
Brand: Tempstar
SKU: 1172786-GEN
Price: 32.00 USD
Availability: InStock

SKU: 1172786-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 2-pole, 40-amp contactor (part #1172786) is the primary switching relay for the outdoor unit on your Tempstar T4H460GKB100 heat pump. When the thermostat calls for cooling or heating, the 24-volt control coil energizes and pulls the contactor closed, sending line voltage to the compressor and condenser fan motor. Because it cycles thousands of times per season, the contactor is one of the most common wear items in any HVAC system. Failure symptoms include a unit that hums but won't start, pitted or welded contacts that prevent shutdown, chattering at the relay, or a complete no-start on the outdoor section while the indoor blower runs normally. Replacing a worn contactor is inexpensive insurance against compressor damage.

Specifications

Spec	Value
Part Number	1172786
Type	Definite Purpose Contactor, 2-Pole
Brand	Tempstar (ICP / Heil)
Contact Rating	40 Amps
Coil Voltage	24 VAC
Poles	2
Fit	OEM Replacement

Compatibility

Engineered as a direct OEM fit for the Tempstar T4H460GKB100 heat pump and shared across many ICP-family condensing units sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Always confirm the printed part number (1172786) and verify the existing contactor is a 2-pole 40A unit with a 24V coil before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and main breaker, then verify zero voltage at the contactor terminals with a multimeter.
Access — Remove the corner service panel from the condensing unit to expose the control box.
Document — Photograph all wire positions before disconnecting anything.
Remove — Label and pull the line, load, and 24V coil wires, then unscrew the old contactor from its bracket.
Install — Mount the new contactor, reconnect each wire exactly per your photo (line in, compressor and fan on load side, 24V to coil terminals).
Test — Restore power, call for cooling, and confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit hums or buzzes but the compressor won't start
Burned, pitted, or welded contacts visible on inspection
Unit fails to shut off when the thermostat is satisfied
Chattering or rapid clicking from the relay during a call

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 2-Pole 40A Contactor fo...

$32.00

Frequently Asked Questions

Does this Contactor fit my Tempstar T4H460GKB100 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T4H460GKB100 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T4H460GKB100 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu