What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TSH530HKA200 — 24V Coil with Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TSH530HKA200 — 24V Coil with Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 30A Contactor for TSH530HKA200 — 24V Coil with Shunt | Ships Today

Name: Tempstar 1-Pole 30A Contactor for TSH530HKA200 — 24V Coil with Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 32.95 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is the OEM definite-purpose contactor (part number 1172472) for the Tempstar TSH530HKA200 condensing unit. It is a single-pole, 30-amp device with a 24-volt control coil and an integrated shunt. The contactor acts as the high-voltage switch that powers the compressor and condenser fan motor whenever the thermostat calls for cooling. The 24V coil pulls the contacts closed to pass line voltage to the outdoor unit, then releases them when the call ends. Because the contacts arc on every cycle, contactors are among the most frequently replaced parts in a condensing unit. Common symptoms of a failing contactor include a steady hum or chatter, contacts that are pitted or welded shut, a compressor that runs nonstop, or an outdoor unit that will not start on a cooling call.

Specifications

Spec	Value
OEM Part Number	1172472
Type	Definite Purpose Contactor
Brand	Tempstar
Poles	1-Pole (Single Pole)
Contact Rating	30 Amps
Coil Voltage	24 VAC
Features	Integrated Shunt
Fitment	OEM Replacement

Compatibility

This contactor is the factory-specified replacement for the Tempstar TSH530HKA200 outdoor unit. The same 1172472 contactor is shared across many ICP-family condensing units (Tempstar, Heil, Comfortmaker, Arcoaire), so it also fits a wide range of equivalent models. Verify your existing contactor is single-pole, 30A, with a 24V coil before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and the breaker, then verify zero voltage across the line terminals with a multimeter.
Access — Remove the electrical access panel on the condensing unit.
Document — Photograph all wire connections before disconnecting anything.
Remove — Transfer the line, load, and 24V coil wires one at a time from the old contactor to the new one to avoid mistakes, then unscrew and remove the old contactor.
Install — Mount the new contactor, reconnect each wire to its matching terminal per your photo, and confirm the 24V coil leads are landed correctly.
Test — Restore power and run a cooling call; verify the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

Loud humming, buzzing, or chattering from the outdoor unit
Burned, pitted, or welded contacts
Compressor runs continuously and will not shut off (stuck closed)
Outdoor unit fails to start on a cooling call (stuck open)

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 30A Contactor fo...

$32.95

Frequently Asked Questions

Does this Contactor fit my Tempstar TSH530HKA200 — 24V Coil with Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TSH530HKA200 — 24V Coil with Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TSH530HKA200 — 24V Coil with Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu