What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T4H324GKD100 — 24V Coil w/ Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4H324GKD100 — 24V Coil w/ Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 30A Contactor for T4H324GKD100 — 24V Coil w/ Shunt | Ships Today

Name: Tempstar 1-Pole 30A Contactor for T4H324GKD100 — 24V Coil w/ Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 34.00 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM single-pole contactor (part number 1172472) is the genuine replacement switch for the Tempstar T4H324GKD100 outdoor unit. Rated at 30 amps with a 24V coil and an integrated shunt, it is energized by the thermostat's 24V call to close the high-voltage circuit feeding the compressor and condenser fan. Contactors wear out from millions of cycles: pitted or welded contacts cause the unit to run continuously or fail to start, while a burned-out coil leaves the unit completely dead on a call for cooling or heating. Ants and debris lodging under the contacts are also a frequent failure cause.

Specifications

Spec	Value
Part Number	1172472
Type	Definite Purpose Contactor (w/ shunt)
Brand	Tempstar (ICP / Heil)
Poles	1-Pole
Contact Rating	30A
Coil Voltage	24V
Application	Compressor / Condenser Fan

Compatibility

Designed for the Tempstar T4H324GKD100 heat pump and ICP-family condensing units that use a 30A 1-pole 24V definite-purpose contactor. Tempstar, Heil and Comfortmaker share common platforms, so this part cross-fits many sibling models — verify part number 1172472 and the 24V coil rating against your existing contactor before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and verify zero voltage across the line terminals with a multimeter.
Access — Remove the control-panel service cover to expose the contactor.
Document — Photograph the line, load, and 24V coil wiring before disconnecting anything.
Remove — Unscrew the contactor from its mounting, then move each wire over one at a time to avoid mix-ups.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo, confirming tight lugs.
Test — Restore power and verify the contactor pulls in on a call and the compressor/fan energize.

Signs You Need a Replacement

Outdoor unit won't start on a call for cooling or heating
Contacts are pitted, burned, or welded shut so the unit never shuts off
Buzzing or chattering at the contactor
Coil reads open on an ohm test — no pull-in

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 30A Contactor fo...

$34.00

Frequently Asked Questions

Does this Contactor fit my Tempstar T4H324GKD100 — 24V Coil w/ Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T4H324GKD100 — 24V Coil w/ Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T4H324GKD100 — 24V Coil w/ Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu