What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T4A648GKD200 — 24V w/ Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T4A648GKD200 — 24V w/ Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 30A Contactor for T4A648GKD200 — 24V w/ Shunt | Ships Today

Name: Tempstar 1-Pole 30A Contactor for T4A648GKD200 — 24V w/ Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 27.95 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This OEM 1-pole definite-purpose contactor with shunt (part number 1172472) is the electrically-controlled switch that energizes the compressor and condenser fan in your Tempstar T4A648GKD200 air conditioner. Rated at 30 amps with a 24-volt control coil, the single-pole design switches one leg of line voltage while the integrated shunt completes the circuit, a common configuration on smaller-tonnage outdoor units. When the thermostat calls for cooling, the 24V coil pulls the contact closed to start the unit. Because the contact arcs on every cycle, this is a high-wear component. Typical failure signs include a unit that won't start, buzzing or chattering at the contactor, pitted or burned contacts, or an outdoor unit that stays running after the cooling call ends.

Specifications

Spec	Value
OEM Part Number	1172472
Type	Definite Purpose Contactor (with shunt)
Poles	1-Pole
Contact Rating	30 Amps
Coil Voltage	24 VAC
Brand	Tempstar (ICP / Heil)
Fits Model	T4A648GKD200

Compatibility

A direct OEM replacement for the Tempstar T4A648GKD200 condensing unit. The 1172472 single-pole contactor with shunt is shared across many ICP-family outdoor units (Tempstar, Heil, Comfortmaker, and related Carrier-engineered platforms). Confirm the part number and the single-pole/shunt configuration on your current contactor before ordering.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter before touching any wiring.
Access — Remove the electrical access panel on the condensing unit.
Document — Photograph all wire connections, including the shunt strap, to match them exactly on the new contactor.
Remove — Transfer the line, load, and 24V coil wires one at a time, then unscrew the old contactor from its bracket.
Install — Mount the new contactor, reconnect each wire per your photo, and verify the shunt and 24V coil leads are correct.
Test — Restore power, call for cooling, and confirm the contact pulls in and the compressor and fan start.

Signs You Need a Replacement

Outdoor unit won't start or only buzzes on a cooling call
Loud humming, chattering, or rapid clicking at the contactor
Visibly pitted, burned, or welded contact points
Compressor and fan run continuously after the thermostat is satisfied

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 30A Contactor fo...

$27.95

Frequently Asked Questions

Does this Contactor fit my Tempstar T4A648GKD200 — 24V w/ Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T4A648GKD200 — 24V w/ Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T4A648GKD200 — 24V w/ Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu