What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model T2H330GKA100 — 24V Coil w/Shunt | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number T2H330GKA100 — 24V Coil w/Shunt | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 30A Contactor for T2H330GKA100 — 24V Coil w/Shunt | Ships Today

Name: Tempstar 1-Pole 30A Contactor for T2H330GKA100 — 24V Coil w/Shunt | Ships Today
Brand: Tempstar
SKU: 1172472-GEN
Price: 24.95 USD
Availability: InStock

SKU: 1172472-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite-purpose contactor (part number 1172472) for the Tempstar T2H330GKA100 heat pump. Rated at 30 amps with a 24-volt control coil and an integrated shunt, the contactor is the electrical switch that energizes the compressor and condenser fan motor whenever the thermostat calls for cooling or heating. When the 24V signal reaches the coil, the magnetic field pulls the contacts closed and sends line voltage to the outdoor unit. Worn, pitted, or welded contacts are one of the most common reasons a heat pump fails to start, hums, or short-cycles. Replacing a failing contactor restores reliable, full-power switching and protects the compressor from chatter and voltage drop.

Specifications

Spec	Value
Part Number	1172472
Type	Definite Purpose Contactor, 1-Pole
Brand	Tempstar (ICP / Heil)
Contact Rating	30 Amps
Coil Voltage	24 VAC
Poles	1
Features	Integrated shunt

Compatibility

Engineered as the factory replacement for the Tempstar T2H330GKA100 heat pump. The same 1172472 contactor is used across many ICP-family condensing units and heat pumps sold under the Tempstar, Heil, Comfortmaker, and Arcoaire brands. Always confirm your existing contactor is a 1-pole 30A unit with a 24V coil before ordering.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and the breaker, then verify zero voltage across the contactor terminals with a multimeter.
Access — Remove the service panel on the condensing unit to expose the control compartment.
Document — Photograph every wire and terminal location before disconnecting anything.
Remove — Note line, load, and 24V coil leads; transfer wires one at a time, then unscrew the old contactor from the bracket.
Install — Mount the new contactor, reconnect each wire to its matching terminal per your photos, and confirm the shunt connection is seated.
Test — Restore power, call for cooling, and verify the contacts pull in cleanly with no chatter and that the compressor and fan energize.

Signs You Need a Replacement

Outdoor unit hums but compressor and fan won't start
Visible pitting, burning, or melting on the contact points
Contacts chatter or buzz instead of closing solidly
Contacts weld shut and the unit runs continuously

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 30A Contactor fo...

$24.95

Frequently Asked Questions

Does this Contactor fit my Tempstar T2H330GKA100 — 24V Coil w/Shunt | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar T2H330GKA100 — 24V Coil w/Shunt | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar T2H330GKA100 — 24V Coil w/Shunt | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu