What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TCH436AKA1 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TCH436AKA1 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 25A Contactor for TCH436AKA1 — 24V Coil | Ships Today

Name: Tempstar 1-Pole 25A Contactor for TCH436AKA1 — 24V Coil | Ships Today
Brand: Tempstar
SKU: 1050699-GEN
Price: 29.00 USD
Availability: InStock

SKU: 1050699-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This genuine OEM single-pole 25-amp contactor (part number 1050699) is the main switching relay for the Tempstar TCH436AKA1 heat pump. Its 24V coil is energized by the thermostat through the control board; when energized, the contactor closes its 25A line-voltage contacts to power the compressor and condenser fan motor. Over time the contacts pit, arc, and weld, or the coil burns out — causing the compressor to chatter, fail to start, or run continuously. Pitted or stuck contacts are one of the most common no-cool / no-heat heat-pump service calls. A fresh OEM contactor restores clean, reliable switching.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor
Brand	Tempstar (ICP / Heil)
Poles	1-Pole
Contact Rating	25 Amps
Coil Voltage	24V
Fitment	OEM Direct Replacement

Compatibility

Direct OEM replacement for the Tempstar TCH436AKA1 heat pump and matching ICP / Heil / Comfortmaker condensing units using a 1-pole 25A, 24V-coil contactor. Confirm pole count, amp rating, and coil voltage against your existing part before ordering.

Installation Guide

Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
Access — Remove the service panel on the condensing unit.
Document — Photograph every line, load, and coil wire before disconnecting.
Remove — Transfer wires one at a time or label them, then unbolt the old contactor from the bracket.
Install — Mount the new contactor and reconnect each wire exactly per your photo.
Test — Restore power and confirm the contactor pulls in and the compressor energizes.

Signs You Need a Replacement

Compressor chatters or hums but won't start.
Burnt, pitted, or welded contacts.
Buzzing or chattering coil noise.
Unit runs nonstop or cycles erratically.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 25A Contactor fo...

$29.00

Frequently Asked Questions

Does this Contactor fit my Tempstar TCH436AKA1 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TCH436AKA1 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TCH436AKA1 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu