Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
Tempstar 1-Pole 25A Contactor for TCH224AKC1 – 24V Coil | Ships Today
Tempstar

Tempstar 1-Pole 25A Contactor for TCH224AKC1 – 24V Coil | Ships Today

SKU: 1050699-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

Overview

This is a genuine OEM single-pole, 25-amp definite purpose contactor (P/N 1050699) with a 24V coil for the Tempstar TCH224AKC1. The contactor is the electrically operated switch that powers the compressor and condenser fan motor whenever the thermostat calls for cooling. The 24V coil pulls the contacts closed so they carry the high-voltage load to the compressor. With age the contacts pit, burn, and weld, and the coil can open. Symptoms of a failing contactor include a unit that won't start, chattering or buzzing at the contactor, contacts welded closed so the compressor never shuts off, and visible arcing or burnt contact faces.

Specifications

Spec Value
Part Number 1050699
Type Definite Purpose Contactor, 1-Pole
Brand Tempstar (ICP / Heil)
Rating 25 Amp
Coil Voltage 24 VAC
Poles 1
Fit OEM Direct Replacement

Compatibility

Direct-fit replacement for the Tempstar TCH224AKC1 condensing unit. The 1050699 1-pole 25A contactor is widely used across compatible ICP, Heil, and Comfortmaker single-stage condensers and heat pumps using a 24V control circuit. Confirm amp rating, pole count, and 24V coil before ordering.

Installation Guide

  1. Safety First – Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter before touching any wiring.
  2. Access – Remove the condensing unit electrical access panel to expose the contactor.
  3. Document – Photograph every line, load, and 24V coil wire before disconnecting.
  4. Remove – Disconnect all wires, unscrew the contactor from its mounting bracket, and lift it out.
  5. Install – Mount the new contactor, then reconnect each wire to the matching terminal per your photo.
  6. Test – Restore power and call for cooling; confirm the contactor pulls in cleanly and the compressor and fan start.

Signs You Need a Replacement

  • Compressor and fan won't start on a cooling call
  • Loud chatter or buzzing from the contactor
  • Contacts welded closed — unit runs continuously and won't shut off
  • Pitted, burnt, or arcing contact faces

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day hassle-free returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $75
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Contactor fit my Tempstar TCH224AKC1 – 24V Coil | Ships Today?
Yes. This is the factory-specified OEM contactor for the Tempstar TCH224AKC1 – 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the contactor on my Tempstar TCH224AKC1 – 24V Coil | Ships Today?
Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.
My AC clicks but the compressor won’t turn on. What’s wrong?
Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.
Is this contactor compatible with Bryant or Payne too?
Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Tempstar contactor?
OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online