What amp contactor do I need for my Tempstar system?

The correct replacement for Tempstar model TCH036AKC1 — 24V Coil | Ships Today is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Tempstar equipment which lists the model number TCH036AKC1 — 24V Coil | Ships Today.

My AC clicks but the compressor does not turn on. What is wrong?

Clicking from the outdoor unit without the compressor starting usually means a worn contactor. The contactor is the relay that sends power to the compressor. When its contacts are pitted or worn, it clicks but cannot establish a solid electrical connection. Other symptoms: visible pitting or burn marks on the contactor face, AC works intermittently, or buzzing from the contactor.

Is this contactor compatible with Bryant or Payne systems too?

Many Tempstar parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Tempstar

Tempstar 1-Pole 25A Contactor for TCH036AKC1 — 24V Coil | Ships Today

Name: Tempstar 1-Pole 25A Contactor for TCH036AKC1 — 24V Coil | Ships Today
Brand: Tempstar
SKU: 1050699-GEN
Price: 26.00 USD
Availability: InStock

SKU: 1050699-GEN Brand: Tempstar

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Overview

This is a genuine OEM single-pole definite-purpose contactor (part number 1050699) for the Tempstar TCH036AKC1 heat pump/condensing unit. The contactor is the electromechanical switch that energizes the compressor and outdoor fan motor when the thermostat calls for cooling. A 24-volt control signal pulls in the coil, closing the 25-amp line-voltage contacts that supply the compressor. Failed contactors typically cause a unit that hums but won't start, pitted or welded contacts that prevent the compressor from shutting off, or a chattering coil. Because the contacts arc on every cycle, the contactor is one of the most common wear items replaced on residential split systems.

Specifications

Spec	Value
Part Number	1050699
Type	Definite Purpose Contactor, 1-Pole
Brand	Tempstar (ICP / Heil)
Contact Rating	25 Amps
Coil Voltage	24 VAC
Poles	1
Fitment	OEM Replacement

Compatibility

Designed as a direct OEM fit for the Tempstar TCH036AKC1 model. As a standard 1-pole 25A 24V definite-purpose contactor, it also replaces the contactor in many ICP-family outdoor units (Tempstar, Heil, Comfortmaker, and other Carrier/ICP-built equipment) originally fitted with part 1050699. Confirm pole count, amp rating, and coil voltage match your original before installing.

Installation Guide

Safety First — Disconnect power at the outdoor disconnect and breaker, then verify zero voltage with a multimeter at the contactor line terminals.
Access — Remove the outdoor unit's electrical service panel.
Document — Photograph all wires and terminal positions before disconnecting anything.
Remove — Label and disconnect the line, load, and 24V coil wires; unscrew the old contactor from its bracket.
Install — Mount the new contactor and reconnect each wire to the matching terminal per your photo.
Test — Restore power and confirm the contactor pulls in on a cooling call and the compressor/fan energize.

Signs You Need a Replacement

Unit hums or buzzes but the compressor won't start.
Visibly pitted, burned, or welded contacts.
Compressor runs continuously and won't shut off (stuck closed).
Chattering or rapid clicking from the contactor on a cooling call.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

Tempstar 1-Pole 25A Contactor fo...

$26.00

Frequently Asked Questions

Does this Contactor fit my Tempstar TCH036AKC1 — 24V Coil | Ships Today?

Yes. This is the factory-specified OEM contactor for the Tempstar TCH036AKC1 — 24V Coil | Ships Today. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the contactor on my Tempstar TCH036AKC1 — 24V Coil | Ships Today?

Difficulty: Medium (30–45 min)
Step 1: Turn off breaker. Step 2: Open condensing unit panel. Step 3: Photograph ALL wiring on the contactor. Step 4: Label each wire with tape. Step 5: Disconnect wires and remove old contactor. Step 6: Mount new contactor, reconnect wires matching your photo. Step 7: Restore power and test.

My AC clicks but the compressor won’t turn on. What’s wrong?

Clicking from the outdoor unit without the compressor starting = worn contactor. The contactor sends power to the compressor. When its contacts are pitted, it clicks but can’t make solid contact. Look for: visible pitting/burn marks on the contactor face, intermittent operation, or buzzing.

Is this contactor compatible with Bryant or Payne too?

Many Tempstar parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Tempstar contactor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu