Tempstar 1/5 HP Condenser Fan Motor for TVH824GKA101 — OEM with Adapter & Harness | Ships Today

Overview

This is the OEM 1/5 HP Fan Motor (part number 1187927) for the Tempstar TVH824GKA101, supplied with its matching mounting adapter (1188001) and fan motor wiring harness (1188022). The condenser fan motor turns the outdoor fan blade that pulls air across the condenser coil to release heat from the refrigerant. When this motor weakens or fails, the system overheats, trips on high head pressure, or stops cooling. The 1/5 HP rating matches the airflow this model is designed for. Common failure symptoms include a humming motor that will not start, a slow or seized fan, breaker trips from overheating, and noisy or hot bearings.

Specifications

Compatibility

This 1/5 HP motor kit is the factory replacement for the Tempstar TVH824GKA101 condenser. The included adapter and harness provide a direct bolt-in and plug-in fit. Confirm the 1/5 HP rating and part number 1187927 against your existing motor before installing.

Installation Guide

1. Safety First — Disconnect power at the disconnect and breaker, then verify zero voltage with a multimeter.
2. Access — Remove the condenser top grille and fan assembly.
3. Document — Photograph all motor wiring and the fan blade position on the shaft.
4. Remove — Loosen the blade set screw, unbolt the old motor, and disconnect the harness.
5. Install — Mount the new motor with the adapter, set the blade at the same depth, and connect the harness per your photo.
6. Test — Restore power and verify the fan spins freely in the correct direction at full speed.

Signs You Need a Replacement

• Fan motor hums but will not start or spin.
• Unit trips on high pressure or overheats during cooling.
• Grinding, squealing, or a wobbling fan blade.
• Motor runs hot or smells burnt.

Shipping & Returns

Ships same day before 3 PM CST. 30-day returns. Backed by the National HVAC Parts fitment guarantee.