Tempstar 1/4 HP Condenser Fan Motor for T4H348GKD200 — OEM 1177473 | Ships Today

Overview

This is a genuine OEM 1/4 HP condenser fan motor (part number 1177473) for the Tempstar T4H348GKD200. The condenser fan motor drives the outdoor fan blade that pulls air across the condenser coil, rejecting heat from the refrigerant. A failing motor leads to high head pressure, poor cooling, compressor overheating, and eventual system shutdown. This 1/4 HP replacement restores correct airflow and protects the compressor from heat-related damage.

Specifications

Compatibility

Direct-fit replacement for the Tempstar T4H348GKD200 heat pump / condensing unit. Used across the ICP / Tempstar / Heil / Comfortmaker family of outdoor units that shipped with the 1/4 HP motor part 1177473. Confirm shaft size, rotation, and mounting before installing.

Installation Guide

1. Safety First — Disconnect power at the disconnect and breaker. Verify zero voltage with a multimeter before handling any wiring.
2. Access — Remove the top grille / fan assembly fasteners on the outdoor unit.
3. Document — Photograph all motor wiring, the run capacitor connections, and the fan blade position on the shaft.
4. Remove — Loosen the blade set screw and pull the blade, then unbolt the old motor from the bracket and disconnect its leads.
5. Install — Mount the new motor, transfer the fan blade to the same shaft depth, and reconnect leads per your photos (including the capacitor).
6. Test — Restore power, confirm the fan spins freely in the correct direction, and verify the unit cools / heats normally.

Signs You Need a Replacement

• Outdoor fan won't start, hums, or only spins when pushed by hand.
• Motor runs hot, is noisy, or has worn/seized bearings.
• Unit trips on high pressure or overheats during cooling.
• Burnt smell or scorched motor leads.

Shipping & Returns

Ships same day on orders placed before 3 PM CST. 30-day returns on unused parts in original packaging. Backed by the National HVAC Parts fitment guarantee.