What MFD capacitor do I need for my Lennox AC?

The correct replacement for Lennox model OEM Lennox Run Capacitor 60 MFD 440V Round — X2510 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Lennox equipment which lists the model number OEM Lennox Run Capacitor 60 MFD 440V Round — X2510.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

IMAGE COMING SOON

Lennox

OEM Lennox Run Capacitor 60 MFD 440V Round — X2510

Name: OEM Lennox Run Capacitor 60 MFD 440V Round — X2510
Brand: Lennox
SKU: LNX-X2510
Price: 18.95 USD
Availability: InStock

SKU: LNX-X2510 Brand: Lennox

$18.95 $24.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine OEM Lennox X2510 is a 60 MFD, 440-volt round run capacitor built to support the high-capacitance demands of compressor motors and larger fan motors in your Lennox HVAC equipment. Its 60 MFD rating provides the strong, continuous phase shift needed for reliable starting and efficient running under load. This is a direct factory replacement manufactured to Lennox specifications for precise fit and dependable performance.

Common failure symptoms: A degraded X2510 capacitor commonly causes a compressor that hums but won't start, hard or delayed starting, tripped breakers, reduced cooling capacity, or a visibly bulging, leaking, or vented top. Since capacitance drops with heat and age, a measured value below the rated 60 MFD tolerance means the part should be replaced.

Why OEM matters: Installing the genuine Lennox X2510 ensures the exact 60 MFD capacitance, 440V rating, and terminal layout your system was engineered around. Substitute capacitors that miss these specs can overheat the compressor, waste energy, and lead to costly failures. Rely on the authentic OEM part to protect your Lennox equipment.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Lennox Run Capacitor 60 MFD ...

$18.95

Frequently Asked Questions

Does this Capacitor fit my Lennox OEM Lennox Run Capacitor 60 MFD 440V Round — X2510?

Yes. This is the factory-specified OEM capacitor for the Lennox OEM Lennox Run Capacitor 60 MFD 440V Round — X2510. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my Lennox OEM Lennox Run Capacitor 60 MFD 440V Round — X2510?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many Lennox parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Lennox capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Lennox Run Capacitor 60 MFD 440V Round — X2510

Shipping Information

Return Policy

Frequently Asked Questions