What MFD capacitor do I need for my Lennox AC?

The correct replacement for Lennox model OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Lennox equipment which lists the model number OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63.

My AC hums but will not start. What part do I need?

An AC that hums but will not start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost needed to start the compressor and fan motors. When it fails, you hear the hum of the motor trying to start but it cannot overcome inertia. Other symptoms include the fan spinning slowly, the AC cycling on and off rapidly, or a visibly swollen or leaking capacitor. Replacement cost: $15 to $80 for the part, DIY in 30 minutes.

Lennox

OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63

Name: OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63
Brand: Lennox
SKU: LNX-69M63
Price: 18.95 USD
Availability: InStock

SKU: LNX-69M63 Brand: Lennox

$18.95 $24.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The genuine OEM Lennox 69M63 is a dual run capacitor rated at 45+4 MFD, 440V, in a round can. It combines two capacitors in one housing to serve both the compressor (the 45 MFD side) and the outdoor condenser fan motor (the 4 MFD side), providing the phase shift and running charge these motors need to start and stay running efficiently in your Lennox system.

Common failure symptoms: A compressor or fan motor that hums but won't spin up, an outdoor fan turning slowly, breakers tripping, warm air from the vents, or repeated hard-start clicking. A swollen, domed, or oil-leaking top on the capacitor confirms it needs to be replaced. Because capacitors degrade with heat and age, they are among the most frequent causes of a Lennox unit that won't cool.

Why OEM matters: The 69M63 meets Lennox's precise capacitance, voltage, and tolerance ratings, so your motors receive the exact torque and current they were engineered for. Off-brand capacitors can fall outside spec, cause motors to overheat, and reduce compressor lifespan. Installing the factory OEM part keeps your Lennox equipment running at rated efficiency and reliability.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Lennox Dual Run Capacitor 45...

$18.95

Frequently Asked Questions

Does this Capacitor fit my Lennox OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63?

Yes. This is the factory-specified OEM capacitor for the Lennox OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the capacitor on my Lennox OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63?

Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.

My AC hums but won’t start. What part do I need?

An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).

Is this capacitor compatible with Bryant or Payne too?

Many Lennox parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Lennox capacitor?

OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Lennox Dual Run Capacitor 45/4 MFD 440V — 69M63

Shipping Information

Return Policy

Frequently Asked Questions