What are the specs for this Pressure Switch?

The correct replacement for Goodman model ACVC950714CXBA Furnace — 0130F00100 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACVC950714CXBA Furnace — 0130F00100.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Goodman

OEM Goodman Pressure Switch for ACVC950714CXBA Furnace — 0130F00100

Name: OEM Goodman Pressure Switch for ACVC950714CXBA Furnace — 0130F00100
Brand: Goodman
SKU: 0130F00100-GEN
Price: 42.95 USD
Availability: InStock

SKU: 0130F00100-GEN Brand: Goodman

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00100 is a genuine OEM air pressure switch for the ACVC950714CXBA high-efficiency condensing gas furnace and compatible Goodman/Amana models. On two-stage and high-efficiency platforms the pressure switch (or switch assembly) confirms that the inducer motor has established the correct venting draft for the active firing rate before the board energizes the igniter and gas valve. Without a proven draft signal, the furnace stays locked out for safety — a common reason a high-efficiency unit clicks but never lights.

Specifications

Part Number: 0130F00100
Type: Negative-pressure (draft proving) switch
Application: Two-stage / high-efficiency draft proving
Function: Verifies inducer draft prior to and during ignition
Fits Model: ACVC950714CXBA (and compatible Goodman/Amana furnaces)

OEM vs. Generic

This higher-capacity switch is calibrated to a specific set point and port layout for the furnace's staged operation. The genuine OEM 0130F00100 guarantees the correct trip pressure for each firing stage. Generic alternatives rarely match staged set points precisely, causing intermittent lockouts that are difficult to diagnose. For reliable combustion safety, install OEM.

Installation Difficulty

Easy (2 of 5). Roughly 15–20 minutes. Disconnect power, document and transfer each wire lead and sensing hose exactly, then mount the new switch in the original orientation. Inspect the inducer, vent, and condensate trap so the replacement isn't masking an underlying draft restriction. Always confirm model/serial compatibility before installing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Pressure Switch for ...

$42.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman ACVC950714CXBA Furnace — 0130F00100?

Yes. This is the factory-specified OEM pressure switch for the Goodman ACVC950714CXBA Furnace — 0130F00100. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman ACVC950714CXBA Furnace — 0130F00100?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu