What igniter fits my Goodman furnace?

The correct replacement for Goodman model GUX060-3 — B1401003S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GUX060-3 — B1401003S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this ignition compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Spark Ignition Assembly for GUX060-3 — B1401003S

Name: OEM Goodman Spark Ignition Assembly for GUX060-3 — B1401003S
Brand: Goodman
SKU: GOODMAN-13373
Price: 73.95 USD
Availability: InStock

SKU: GOODMAN-13373 Brand: Goodman

$73.95 $96.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1401003S is a genuine OEM spark ignition assembly for the Goodman GUX060-3 gas furnace. This assembly combines the spark electrode and flame-sensing rod that fire directly at the burner: the ignition control sends high-voltage pulses to the electrode to light the gas, then the sensor rod confirms flame. A cracked ceramic insulator, worn electrode gap, or fouled sensor causes no ignition, weak sparking, or short-cycle lockouts — replacing this assembly restores dependable spark-to-flame startup.

Specifications

Type: combined spark electrode + flame-sense assembly
Insulator: high-temp ceramic
Bracket: OEM-matched burner mount
Function: direct spark ignition and flame rectification
Fits: Goodman GUX060-3 and compatible Goodman/Amana furnaces
OEM Part Number: B1401003S

OEM vs. Generic

The OEM Goodman assembly guarantees the correct electrode gap, sensor position, and bracket geometry for reliable ignition on the GUX060-3. The generic equivalent offers the same spark-and-sense function at a lower cost for budget repairs. Correct gap and positioning are critical, so verify alignment after install.

Install Difficulty

Easy to Moderate — typically one or two mounting screws and a spark/sensor lead. Power down the furnace, swap the assembly, confirm the electrode gap and that the tips sit in the burner flame path, then test a full ignition cycle.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Spark Ignition Assem...

$73.95

Frequently Asked Questions

Does this Ignition fit my Goodman GUX060-3 — B1401003S?

Yes. This is the factory-specified OEM ignition for the Goodman GUX060-3 — B1401003S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the ignition on my Goodman GUX060-3 — B1401003S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this ignition compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman ignition?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu