What igniter fits my Goodman furnace?

The correct replacement for Goodman model WGFM295090V5DAA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFM295090V5DAA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Silicon Nitride Hot Surface Ignitor for WGFM295090V5DAA — 0130F00008S

Name: OEM Goodman Silicon Nitride Hot Surface Ignitor for WGFM295090V5DAA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-14560
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-14560 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The 0130F00008S is a genuine OEM silicon nitride hot surface ignitor engineered for Goodman WGFM295090V5DAA 95% AFUE two-stage variable-speed gas furnaces. When your furnace fails to light, produces no heat, or short-cycles on ignition lockout, a cracked or worn ignitor is the most common culprit. This direct-fit component restores reliable, repeatable ignition without adapters or rewiring.

Specifications

Type: Silicon nitride hot surface ignitor
OEM Part Number: 0130F00008S
Fits: Goodman WGFM295090V5DAA furnace
Application: Gas-fired furnace ignition system
Connector: Factory OEM plug — no splicing required
Rugged silicon nitride element resists thermal shock better than legacy silicon carbide

OEM vs. Generic

This is a true Goodman OEM part built to exact factory tolerances and ignition timing. Generic aftermarket ignitors may fit physically but often run hotter or cooler than spec, shortening element life and causing intermittent no-heat faults. Choosing OEM protects your furnace's warranty and control board and delivers longer, more dependable service.

Install Difficulty

Easy (2/5). Most homeowners can replace this ignitor in 15–20 minutes with a nut driver. Always shut off gas and electrical power at the disconnect before servicing. Handle the ceramic element only by its base — skin oils and rough contact can crack silicon nitride. If you are unsure, a licensed HVAC technician can complete the swap quickly.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Silicon Nitride Hot ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WGFM295090V5DAA — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WGFM295090V5DAA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WGFM295090V5DAA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu