What igniter fits my Goodman furnace?

The correct replacement for Goodman model WGFM28070V4BXAB — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFM28070V4BXAB — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Silicon Nitride Hot Surface Ignitor for WGFM28070V4BXAB — 0130F00008S

Name: OEM Goodman Silicon Nitride Hot Surface Ignitor for WGFM28070V4BXAB — 0130F00008S
Brand: Goodman
SKU: GOODMAN-14448
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-14448 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor is a genuine OEM silicon-nitride igniter built for the WGFM28070V4BXAB gas furnace and compatible Goodman/Amana models. When the thermostat calls for heat, the control board energizes the ignitor, which glows red-hot to light the gas at the burners. A cracked, worn, or no-glow ignitor is the single most common cause of a no-heat call — this OEM part restores reliable, first-try ignition.

Type: Hot Surface Ignitor (HSI)
Element: Silicon nitride — durable, resistant to thermal shock
Function: Glows to ignite burner gas on a call for heat
Fitment: WGFM28070V4BXAB and compatible Goodman furnaces
OEM Part #: 0130F00008S

OEM vs. Generic: The genuine Goodman silicon-nitride ignitor uses the correct resistance, bracket, and connector for a true plug-and-play fit and long service life. Generic carbide-style igniters are more fragile and may draw the wrong current, shortening lifespan. OEM offers the best durability and reliability.

Install difficulty: Easy — disconnect power, unplug the wiring connector, remove one or two mounting screws, and install the new ignitor. Avoid touching the fragile element with bare fingers. Always cut power at the breaker before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Silicon Nitride Hot ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WGFM28070V4BXAB — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WGFM28070V4BXAB — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WGFM28070V4BXAB — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu

OEM Goodman Silicon Nitride Hot Surface Ignitor for WGFM28070V4BXAB — 0130F00008S

Shipping Information

Return Policy

Frequently Asked Questions