What igniter fits my Goodman furnace?

The correct replacement for Goodman model GMV80704BXA — 20165703S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GMV80704BXA — 20165703S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Silicon Nitride Hot Surface Ignitor for GMV80704BXA — 20165703S

Name: OEM Goodman Silicon Nitride Hot Surface Ignitor for GMV80704BXA — 20165703S
Brand: Goodman
SKU: GOODMAN-12617
Price: 69.95 USD
Availability: InStock

SKU: GOODMAN-12617 Brand: Goodman

$69.95 $89.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 20165703S Hot Surface Ignitor is a genuine OEM ignition component for the GMV80704BXA two-stage variable-speed gas furnace. This silicon-nitride ignitor glows red-hot on each call for heat to light the main burners. Silicon-nitride construction resists the thermal shock and cracking that plague older silicon-carbide ignitors, delivering longer service life and more reliable ignition. A cracked or worn ignitor is the single most common cause of intermittent no-heat and ignition lockout faults on Goodman 80% furnaces.

Part Number: 20165703S
Type: Hot surface ignitor (HSI)
Element: Silicon nitride — high durability
Voltage: 120V AC
Fits: Goodman GMV80704BXA and compatible GMV80 series furnaces

OEM vs. Generic

The genuine Goodman OEM ignitor matches the exact resistance, bracket geometry, and burner alignment required for consistent ignition. Generic universal ignitors often require bending brackets or adapters and may not seat correctly in the burner flame path. For a critical, heat-cycle component, OEM is strongly recommended.

Installation Difficulty

Moderate (2/5). Remove one or two mounting screws and disconnect the ignitor plug. Never touch the ignitor element with bare fingers — skin oils cause hot spots and premature failure. Shut off gas and 120V power before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Silicon Nitride Hot ...

$69.95

Frequently Asked Questions

Does this Igniter fit my Goodman GMV80704BXA — 20165703S?

Yes. This is the factory-specified OEM igniter for the Goodman GMV80704BXA — 20165703S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman GMV80704BXA — 20165703S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu