What igniter fits my Goodman furnace?

The correct replacement for Goodman model AMVC95 — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMVC95 — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Silicon Nitride Hot Surface Ignitor for AMVC95 — 0130F00008S

Name: OEM Goodman Silicon Nitride Hot Surface Ignitor for AMVC95 — 0130F00008S
Brand: Goodman
SKU: GOODMAN-8870
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-8870 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

Restore reliable ignition on your Amana/Goodman AMVC950905DXAA modulating gas furnace with the genuine OEM 0130F00008S hot surface ignitor. This silicon nitride igniter is the factory-specified component for the AMVC95 series and is engineered to survive thousands of ignition cycles without the brittleness of older silicon carbide designs. When your furnace fails to light, throws a lockout code, or the burners are slow to ignite, a worn ignitor is the most common culprit.

Specifications

OEM Part Number: 0130F00008S
Element Type: Silicon nitride hot surface ignitor
Fits: Amana / Goodman AMVC950905DXAA and AMVC95 modulating furnaces
Function: Direct spark-free burner ignition
Mounting: Direct-fit bracket, factory connector

OEM vs. Generic

The OEM silicon nitride element delivers the exact resistance curve, dwell time, and mounting geometry Goodman engineered for the AMVC95, protecting your control board from mis-timed ignition. Our Generic hot surface ignitor is a budget-friendly universal alternative that fits the same footprint and is ideal for backup stock, though tolerances may vary slightly from factory spec.

Installation

Difficulty: Easy (1 of 3). A single mounting screw and a plug-in connector — most homeowners complete this in 15–20 minutes. Always shut off gas and power before servicing. Handle the ceramic element only by its base to avoid contamination.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Silicon Nitride Hot ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman AMVC95 — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman AMVC95 — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman AMVC95 — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu