What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1442M41AA — 0130M00075 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1442M41AA — 0130M00075.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman R-410A Low Pressure Switch for APH1442M41AA — 0130M00075

Name: OEM Goodman R-410A Low Pressure Switch for APH1442M41AA — 0130M00075
Brand: Goodman
SKU: GOODMAN-15425
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-15425 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00075 Low Pressure Switch

The 0130M00075 is a genuine OEM low-pressure (loss-of-charge) safety switch engineered for the Goodman/Amana APH1442M41AA heat pump and compatible R-410A systems. Wired into the low side of the refrigeration circuit, it opens the control circuit if suction pressure drops too far — protecting the compressor from running on a low or lost charge, a blocked metering device, or a failed reversing valve. A weak or stuck low-pressure switch is a common cause of intermittent no-cool/no-heat lockouts, making this an inexpensive first replacement in the diagnostic path.

Specifications

Part type: Low-pressure / loss-of-charge auto-reset switch
Refrigerant: R-410A systems
Function: Opens on low suction pressure, auto-resets on recovery
Fit: Goodman & Amana heat pumps, incl. APH1442M41AA
OEM Part Number: 0130M00075
Connection: Factory spade terminals

OEM vs. Generic

The genuine Goodman part arrives factory-calibrated to the exact cut-out/cut-in pressures your unit's control board expects, with a sealed connector rated for outdoor condenser service. Lower-cost generic switches may use approximate trip points or lighter housings that can nuisance-trip or fail early in weather-exposed applications. For a safety control, we recommend the OEM part.

Install Difficulty

Easy (2/5). Recover or pump down the charge if the switch is not on a Schrader fitting, disconnect power, unclip the two wire terminals, thread out the old switch, and reinstall. Most techs complete the swap in 20–30 minutes. Always verify system charge after replacement.

This is a safety component — installation by an EPA-certified HVAC technician is recommended.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman R-410A Low Pressure ...

$22.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1442M41AA — 0130M00075?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1442M41AA — 0130M00075. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1442M41AA — 0130M00075?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu