What are the specs for this Pressure Switch?

The correct replacement for Goodman model ACSH961155DXAA Furnace — 0130F00070 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH961155DXAA Furnace — 0130F00070.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Pressure Switch for ACSH961155DXAA Furnace — 0130F00070

Name: OEM Goodman Pressure Switch for ACSH961155DXAA Furnace — 0130F00070
Brand: Goodman
SKU: GOODMAN-2363
Price: 18.95 USD
Availability: InStock

SKU: GOODMAN-2363 Brand: Goodman

$18.95 $25.58

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00070 Pressure Switch

The Goodman 0130F00070 is a genuine OEM negative-air pressure switch built for the ACSH961155DXAA 96% AFUE condensing gas furnace. This switch proves that the inducer (draft) blower is running and that the venting and condensate paths are clear before the control board allows ignition. It senses the negative pressure created by the inducer through a hose; if pressure is insufficient — due to a weak inducer, a blocked flue or intake, water in the trap, or a cracked hose — the switch stays open and the furnace locks out on a no-heat fault instead of firing.

Specifications

OEM Part Number: 0130F00070
Type: Negative-pressure (draft) proving switch
Function: Inducer / venting safety interlock
Connection: Hose port + spade terminals
Compatible Model: Goodman ACSH961155DXAA (verify trip point against your unit)
Brand: Goodman / Amana compatible

OEM vs. Generic

Pressure switches are calibrated to a specific trip point (in. w.c.) matched to the furnace's inducer and venting design. The OEM 0130F00070 carries the exact factory setpoint and port configuration. A generic switch with the wrong threshold can cause nuisance lockouts or, worse, allow operation with inadequate draft. OEM is strongly recommended for this safety part.

Install Difficulty: Easy (2/5)

Power down, photograph the hose and wire routing, remove the mounting screws, transfer the hose and terminals to the new switch, and remount. About 20–25 minutes. Verify the hose is clear and the condensate trap drains freely before retesting.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Pressure Switch for ...

$18.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman ACSH961155DXAA Furnace — 0130F00070?

Yes. This is the factory-specified OEM pressure switch for the Goodman ACSH961155DXAA Furnace — 0130F00070. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman ACSH961155DXAA Furnace — 0130F00070?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu