What are the specs for this Pressure Switch?

The correct replacement for Goodman model ACSH960904CXAA Furnace — 0130F00068 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number ACSH960904CXAA Furnace — 0130F00068.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

Goodman

OEM Goodman Pressure Switch for ACSH960904CXAA Furnace — 0130F00068

Name: OEM Goodman Pressure Switch for ACSH960904CXAA Furnace — 0130F00068
Brand: Goodman
SKU: 0130F00068-GEN
Price: 22.95 USD
Availability: InStock

SKU: 0130F00068-GEN Brand: Goodman

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00068 is a genuine OEM pressure switch engineered for the ACSH960904CXAA high-efficiency gas furnace. This negative-pressure safety switch monitors draft from the inducer motor and verifies that the venting and condensate paths are clear before allowing ignition. If proper draft is not sensed, the switch keeps the gas valve closed and the furnace will fault, protecting against unsafe combustion or venting conditions.

Specifications

Part Number: 0130F00068
Type: Negative-pressure / draft-proving switch
Function: Confirms inducer draft and clear venting before ignition
Connection: Hose port with spade terminals
Compatible Model: Goodman ACSH960904CXAA (96% AFUE furnace)
Brand: Goodman OEM

OEM vs. Generic

The genuine Goodman OEM switch is factory-calibrated to the exact pressure setpoint (in. w.c.) the ACSH960904CXAA requires. A generic switch with a mismatched trip point is a frequent cause of intermittent pressure-switch lockout codes — either failing to close on good draft or staying closed when it should open. For dependable, code-correct operation, the OEM part is the right replacement.

Installation Difficulty

Moderate (3/5). Shut off power and gas, disconnect the sensing hose and wire terminals, remove the mounting screws, and install the new switch with the hose port pointed the same direction to avoid condensate traps. Allow 20–30 minutes and confirm the inducer draft and vent are clear before restarting.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Pressure Switch for ...

$22.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman ACSH960904CXAA Furnace — 0130F00068?

Yes. This is the factory-specified OEM pressure switch for the Goodman ACSH960904CXAA Furnace — 0130F00068. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman ACSH960904CXAA Furnace — 0130F00068?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu