What are the specs for this Pressure Switch?

The correct replacement for Goodman model AMES801005CXAA — 0130F00505 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number AMES801005CXAA — 0130F00505.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Pressure Switch -0.70" NO for AMES801005CXAA — 0130F00505

Name: OEM Goodman Pressure Switch -0.70" NO for AMES801005CXAA — 0130F00505
Brand: Goodman
SKU: GOODMAN-4684
Price: 15.95 USD
Availability: InStock

SKU: GOODMAN-4684 Brand: Goodman

$15.95 $21.50

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00505 Pressure Switch — -0.70" W.C., Normally Open

The 0130F00505 is the OEM draft/air-proving pressure switch for the Amana/Goodman AMES801005CXAA 80% gas furnace. Rated to close at a set point of -0.70 inches of water column (normally open), it confirms that the induced-draft blower is running and pulling adequate negative pressure before the control board permits ignition. If the vent is blocked, the inducer is weak, or a hose is cracked, the switch stays open and the furnace safely refuses to fire — preventing operation without proper flue draft.

Specifications

Function: Draft / combustion-air proving switch
Set point: -0.70 in. W.C.
Configuration: Normally Open (NO), closes on draft
Fits: Amana / Goodman AMES801005CXAA 80% furnace
OEM Part Number: 0130F00505
Brand: Goodman / Amana factory OEM

OEM vs. Generic

Pressure-switch set points are model-specific. The OEM 0130F00505 is factory-matched to the -0.70" draft this furnace produces. A generic switch with the wrong set point or action (NO vs. NC) will cause lockouts or, worse, allow firing without proven draft. For this safety interlock, use the exact OEM rating.

Installation

Difficulty: Easy (20 minutes). One or two spade terminals, a rubber sensing hose, and screw mounting. Cut power and gas first, inspect the sensing hose and inducer port for soot or blockage, and verify the -0.70" NO rating stamped on the switch matches the original.

Fits the AMES801005CXAA furnace. For fitment assistance, email info@nationalhvacparts.com.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Pressure Switch -0.7...

$15.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman AMES801005CXAA — 0130F00505?

Yes. This is the factory-specified OEM pressure switch for the Goodman AMES801005CXAA — 0130F00505. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman AMES801005CXAA — 0130F00505?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu