What are the specs for this Pressure Switch?

The correct replacement for Goodman model WPH4360AMAB — 0130M00075 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WPH4360AMAB — 0130M00075.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Low Pressure Switch for WPH4360AMAB — 0130M00075

Name: OEM Goodman Low Pressure Switch for WPH4360AMAB — 0130M00075
Brand: Goodman
SKU: GOODMAN-15018
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-15018 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Genuine Goodman 0130M00075 Low Pressure Switch

The Goodman 0130M00075 is an OEM low-pressure (loss-of-charge) safety switch for the suction/low side of WPH4360AMAB packaged units. It shuts the compressor down when suction pressure drops too low — the classic symptom of a refrigerant leak, a stuck metering device, or a frozen indoor coil. By stopping the compressor before it runs starved of refrigerant and oil, this small switch prevents overheating and expensive compressor damage.

Specifications

Function: Low-pressure / loss-of-charge cut-out
Refrigerant: R-410A low-side control
Reset: Automatic once suction pressure recovers
Connection: Quick-connect spade terminals, factory port fitting
Fits: Goodman/Amana WPH4360AMAB
OEM part number: 0130M00075

OEM vs. Generic

The genuine switch carries Goodman's calibrated open/close setpoints so it protects the compressor without nuisance-tripping in low-ambient or startup conditions. Generic low-pressure switches often use approximate setpoints that either trip during normal cold-weather operation or allow the compressor to run dangerously low on charge. For a safety control, matched calibration is worth far more than the small price difference.

Installation Difficulty

Moderate — typically a Schrader-mounted switch with two control wires. Depressurize or use a valve-core tool as needed, then reconnect the terminals to the correct leads. Confirm the system holds charge before returning to service. Roughly 30–45 minutes; always cut power first.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Low Pressure Switch ...

$22.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman WPH4360AMAB — 0130M00075?

Yes. This is the factory-specified OEM pressure switch for the Goodman WPH4360AMAB — 0130M00075. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman WPH4360AMAB — 0130M00075?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu