What are the specs for this Pressure Switch?

The correct replacement for Goodman model DCH0600104BXXXAC Unit — 0130M00075 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DCH0600104BXXXAC Unit — 0130M00075.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Low Pressure Switch for DCH0600104BXXXAC Unit — 0130M00075

Name: OEM Goodman Low Pressure Switch for DCH0600104BXXXAC Unit — 0130M00075
Brand: Goodman
SKU: GOODMAN-9397
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-9397 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00075 Low Pressure Switch

The Goodman 0130M00075 is a low-pressure safety switch built as a direct OEM replacement for DCH0600104BXXXAC package units. It monitors refrigerant suction pressure and opens the 24V control circuit to stop the compressor when pressure drops too low — protecting against loss-of-charge, refrigerant leaks, and freeze-up conditions that would otherwise damage the compressor.

Specifications

Type: Low-pressure / loss-of-charge safety switch
Circuit: 24V low-voltage safety control
Function: Opens on low refrigerant suction pressure
Fit: Direct OEM replacement for DCH0600104BXXXAC
OEM Part Number: 0130M00075

OEM vs. Generic

As a genuine Goodman OEM component, this switch is factory-calibrated to the correct cut-out and cut-in suction pressures for your system. Aftermarket alternatives can trip early, causing short-cycling, or trip late, leaving the compressor unprotected during a slow leak. OEM delivers the exact protection your unit was designed around.

Installation Difficulty

Moderate (2/5). The switch mounts to a Schrader-type port on the suction line and can usually be replaced with minimal refrigerant loss. Cut power to the unit, swap the two control wires to the new switch, and thread it on securely. Since it connects to the sealed refrigerant system, we recommend a licensed HVAC technician if you are not comfortable with refrigerant service ports.

Always disconnect power before servicing. Refrigerant work should be performed by an EPA-certified technician.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Low Pressure Switch ...

$22.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman DCH0600104BXXXAC Unit — 0130M00075?

Yes. This is the factory-specified OEM pressure switch for the Goodman DCH0600104BXXXAC Unit — 0130M00075. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman DCH0600104BXXXAC Unit — 0130M00075?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu