OEM Goodman Low Pressure Switch for DCC0720153VHDXAA — 0130M00087

The Goodman 0130M00087 Low Pressure Switch is a genuine OEM safety control built for DCC0720153VHDXAA commercial package air conditioners and other compatible Goodman/Amana systems. This loss-of-charge switch monitors suction-line pressure and opens the 24V control circuit when refrigerant pressure falls below the safe minimum, stopping the compressor before it runs low on charge and self-destructs.

Specifications

• Type: Auto-reset low pressure / loss-of-charge switch
• Approx. cut-out: ~20–25 PSI (R-410A)
• Approx. cut-in: ~45–50 PSI
• Connection: 1/4" SAE male flare with Schrader depressor
• Electrical: Single-pole, 24V control circuit
• Fits: DCC0720153VHDXAA and other Goodman/Amana package units

OEM vs. Generic

The factory OEM 0130M00087 is calibrated to Goodman's exact trip pressures and uses a matched flare fitting and pin depressor, so it seals on the first install and protects under warranty conditions. Generic universal switches often have looser tolerances and mismatched cut-in/cut-out points that cause nuisance trips or leave the compressor unprotected. For a critical safety control, OEM is the safer choice.

Install Difficulty

Easy (2/5). Recover or pump down as required, unscrew the old switch from the Schrader port, thread on the replacement, reconnect the two 24V leads, and leak-check. Typically a 15–20 minute job for a qualified HVAC technician.