OEM Goodman Low Pressure Switch for DCC0720153VAMJAA — 0130M00087

The Goodman 0130M00087 Low Pressure Switch is a genuine OEM safety control built for DCC0720153VAMJAA commercial package air conditioners and other compatible Goodman/Amana systems. This loss-of-charge switch continuously monitors suction-line pressure and automatically opens the control circuit when refrigerant pressure drops below the safe threshold, shutting down the compressor before it can run dry and suffer expensive damage.

Specifications

• Type: Auto-reset low pressure / loss-of-charge switch
• Approx. cut-out: ~20–25 PSI (R-410A)
• Approx. cut-in: ~45–50 PSI
• Connection: 1/4" SAE male flare with Schrader depressor
• Electrical: Single-pole, 24V control circuit
• Fits: DCC0720153VAMJAA and other Goodman/Amana package units

OEM vs. Generic

The factory OEM 0130M00087 is calibrated to Goodman's exact trip pressures and uses a matched flare fitting and pin depressor, so it seals on the first install and protects under warranty conditions. Generic universal switches often arrive with looser tolerances and non-matching cut-in/cut-out points, which can cause nuisance trips or fail to protect the compressor. For a control this critical, OEM is the safer long-term choice.

Install Difficulty

Easy (2/5). Recover or pump down as required, unscrew the old switch from the Schrader port, thread on the replacement, reconnect the two 24V leads, and leak-check. Typically a 15–20 minute job for a qualified HVAC technician.