What are the specs for this Pressure Switch?

The correct replacement for Goodman model DBC3003VAA — 0130M00087 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number DBC3003VAA — 0130M00087.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Low Pressure Switch for DBC3003VAA — 0130M00087

Name: OEM Goodman Low Pressure Switch for DBC3003VAA — 0130M00087
Brand: Goodman
SKU: GOODMAN-431
Price: 26.95 USD
Availability: InStock

SKU: GOODMAN-431 Brand: Goodman

$26.95 $36.38

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00087 Low Pressure Switch is a genuine OEM safety control for the Goodman DBC3003VAA air conditioner and compatible condensing units. It senses low-side suction pressure and opens the compressor circuit when pressure drops below the safe threshold — protecting against a loss-of-charge condition, a refrigerant leak, or operation in cold ambient temperatures. If your system runs but won't cool, trips on a low-pressure lockout, or you suspect a slow leak, the low pressure switch is a critical part to verify and replace.

Specifications

Part Number: 0130M00087
Type: Low pressure cut-off (auto-reset)
Function: Opens compressor circuit on low-side underpressure / loss of charge
Brand: Goodman OEM
Fits Model: DBC3003VAA and compatible Goodman/Amana units
Connection: Quick-connect spade terminals

OEM vs. Generic

As a genuine Goodman OEM switch, this part is calibrated to the precise cut-in/cut-out pressures your system's control board expects. Generic substitutes frequently use approximate trip points that either nuisance-trip in cool weather or fail to lock out a leaking system — risking compressor damage. For a low-cost safety control, the OEM part is the smart investment.

Installation

Difficulty: Easy (DIY-friendly). Cut power at the disconnect, remove the access panel, pull the two spade terminals, and unthread the switch from its Schrader-equipped service port — no recovery or evacuation needed on port-mounted units. Typical replacement takes 15–20 minutes. Confirm power is off before working inside the control box.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Low Pressure Switch ...

$26.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman DBC3003VAA — 0130M00087?

Yes. This is the factory-specified OEM pressure switch for the Goodman DBC3003VAA — 0130M00087. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman DBC3003VAA — 0130M00087?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu