What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1424M41AB — 0130M00075 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1424M41AB — 0130M00075.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Low Pressure Switch for APH1424M41AB — 0130M00075

Name: OEM Goodman Low Pressure Switch for APH1424M41AB — 0130M00075
Brand: Goodman
SKU: GOODMAN-15332
Price: 34.95 USD
Availability: InStock

SKU: GOODMAN-15332 Brand: Goodman

$34.95 $44.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130M00075 Low Pressure Switch

The 0130M00075 is a genuine OEM low-pressure switch for the Goodman/Amana APH1424M41AB packaged heat pump. Installed on the suction (low) side of the refrigerant circuit, it guards the compressor against loss-of-charge and low-pressure conditions. If suction pressure falls below the factory setpoint — from a refrigerant leak, restricted metering device, or low ambient operation — the switch opens the control circuit and shuts down the compressor before it can run low on lubrication or slug. It automatically resets once pressure returns to a safe range.

Specifications

Part Number: 0130M00075
Type: Low-pressure / loss-of-charge safety switch
Calibration: Factory-set to OEM open & reset pressures
Connection: Schrader-style refrigerant fitting with spade terminals
Fits: Goodman & Amana APH1424M41AB heat pumps
Function: Low-charge compressor protection

OEM vs. Generic

The OEM 0130M00075 comes calibrated to Goodman's exact low-side setpoints. Aftermarket switches frequently trip at the wrong pressure, causing short-cycling in cold weather or failing to protect against a slow leak. For dependable low-side protection, choose OEM.

Installation Difficulty

Moderate. Typically mounts on a Schrader fitting, allowing replacement without opening the sealed system or recovering refrigerant. Kill power, unthread the failed switch, install the new one, and reconnect the terminals. Verify the fitting seats fully and leak-check. No EPA cert required if the system stays sealed.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Low Pressure Switch ...

$34.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1424M41AB — 0130M00075?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1424M41AB — 0130M00075. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1424M41AB — 0130M00075?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu