What are the specs for this Pressure Switch?

The correct replacement for Goodman model APH1330H41CA — 0130M00075 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number APH1330H41CA — 0130M00075.

Is this pressure switch compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Low Pressure Switch for APH1330H41CA — 0130M00075

Name: OEM Goodman Low Pressure Switch for APH1330H41CA — 0130M00075
Brand: Goodman
SKU: GOODMAN-0130M00075
Price: 22.95 USD
Availability: InStock

SKU: GOODMAN-0130M00075 Brand: Goodman

$22.95 $29.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130M00075 is a genuine OEM low-pressure switch built as a direct-fit replacement for the APH1330H41CA heat pump and compatible Goodman/Amana units. This control monitors suction-side refrigerant pressure and opens the compressor circuit when pressure drops too low — protecting the compressor from running against a loss of charge, a slow refrigerant leak, or a frozen evaporator coil. It's a low-cost part that prevents very expensive compressor damage.

Specifications

Type: Low-pressure / loss-of-charge safety switch
Function: opens compressor circuit on low suction pressure
OEM Part Number: 0130M00075
Brand: Goodman (Amana compatible)
Equipment: Heat Pump — model APH1330H41CA
Fit: Direct OEM replacement

OEM vs. Generic

The OEM 0130M00075 is factory-calibrated to the correct cut-out and cut-in pressures for this system's refrigerant charge, and it uses the exact fitting and terminal connector. Generic substitutes frequently trip at incorrect set-points, causing intermittent no-cool/no-heat lockouts that are hard to diagnose. For dependable compressor protection, match the OEM specification.

Installation Difficulty

Moderate to advanced — best performed by a licensed HVAC technician. Depending on whether the port is Schrader-style or brazed, service may require refrigerant recovery and EPA-compliant handling. Always kill power at the disconnect first. Typical job runs 30–45 minutes.

Disconnect power before servicing and confirm the OEM part number on your existing switch before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Low Pressure Switch ...

$22.95

Frequently Asked Questions

Does this Pressure Switch fit my Goodman APH1330H41CA — 0130M00075?

Yes. This is the factory-specified OEM pressure switch for the Goodman APH1330H41CA — 0130M00075. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the pressure switch on my Goodman APH1330H41CA — 0130M00075?

Difficulty: Medium (20–30 min)
Step 1: Turn off power. Step 2: Locate pressure switch near draft inducer. Step 3: Note tubing orientation. Step 4: Disconnect tubing and wires. Step 5: Remove screw, install new switch. Step 6: Reconnect tubing and wires, restore power.

My furnace shows a pressure switch error. What do I replace?

Furnace LED showing pressure switch error = switch not detecting draft inducer airflow. Try first: clear the rubber tubing to the switch (often clogged with condensation). If problem persists, replace the pressure switch.

Is this pressure switch compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman pressure switch?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu