What igniter fits my Goodman furnace?

The correct replacement for Goodman model GUE120-5 — B1370724 is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number GUE120-5 — B1370724.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this ignition module compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Ignition Control Module for GUE120-5 — B1370724

Name: OEM Goodman Ignition Control Module for GUE120-5 — B1370724
Brand: Goodman
SKU: GOODMAN-13054
Price: 195.95 USD
Availability: InStock

SKU: GOODMAN-13054 Brand: Goodman

$195.95 $249.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman B1370724 Ignition Control Module is a genuine OEM control board for GUE120-5 gas furnaces. This module orchestrates the ignition sequence — energizing the igniter, opening the gas valve, monitoring the flame-sense circuit, and locking out on a failed light for safety. When a furnace won't ignite, short-cycles on flame loss, or shows repeated lockout fault codes, a failed ignition module is a frequent root cause.

Part Number: B1370724
Type: Ignition Control Module / Furnace Control Board
Function: Ignition timing, gas valve control, flame sensing, safety lockout
Fits Model: Goodman GUE120-5 gas furnace
Equipment: Furnace

OEM vs. Generic

The B1370724 is a genuine Goodman board programmed with the exact ignition timing, trial-for-ignition, and safety-lockout logic the GUE120-5 requires. Universal ignition boards may not match the furnace's flame-sense thresholds or timing, risking nuisance lockouts or unsafe operation. Because this component governs gas ignition, OEM is strongly recommended.

Installation Difficulty

Advanced — Requires labeling and transferring multiple wire harnesses, matching connector orientation, and verifying flame-sense microamps after startup. This is a gas-safety component; installation by a licensed HVAC technician is strongly advised. Shut off power and gas before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Ignition Control Mod...

$195.95

Frequently Asked Questions

Does this Ignition Module fit my Goodman GUE120-5 — B1370724?

Yes. This is the factory-specified OEM ignition module for the Goodman GUE120-5 — B1370724. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the ignition module on my Goodman GUE120-5 — B1370724?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this ignition module compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman ignition module?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu