What igniter fits my Goodman furnace?

The correct replacement for Goodman model WGFM28070V4BXAA — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFM28070V4BXAA — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for WGFM28070V4BXAA — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for WGFM28070V4BXAA — 0130F00008S
Brand: Goodman
SKU: GOODMAN-14436
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-14436 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor is a genuine OEM igniter built for the Goodman WGFM28070V4BXAA gas furnace. On each heat call the control board energizes this ignitor, which glows red-hot to light the burners. A cracked or worn ignitor is the most common cause of no-heat/no-ignition — replacing it restores reliable startup.

Specifications

OEM Part Number: 0130F00008S
Category: Igniter — Hot Surface Ignitor (HSI)
Element: Silicon nitride style — durable, faster warm-up, resistant to thermal shock
Voltage: 120V line-voltage ignition system
Equipment: Gas Furnace
Fits Model: WGFM28070V4BXAA
Fit Type: Direct OEM replacement

OEM vs. Generic

The OEM 0130F00008S ships with the correct mounting bracket, connector, and lead length so it drops into the burner assembly without adapters. Generic silicon-nitride ignitors can save money but may need wiring splices and vary in resistance/lifespan. For dependable ignition, OEM is the safe choice.

Install Difficulty

Easy to Moderate. Shut off power and gas, unplug the connector, remove one or two mounting screws, and reverse. Handle only by the ceramic base — never touch the glowing element with bare fingers. Typically a 15–20 minute repair.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WGFM28070V4BXAA — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WGFM28070V4BXAA — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WGFM28070V4BXAA — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu