What igniter fits my Goodman furnace?

The correct replacement for Goodman model WGFD293090V5DAB — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFD293090V5DAB — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for WGFD293090V5DAB — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for WGFD293090V5DAB — 0130F00008S
Brand: Goodman
SKU: GOODMAN-14248
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-14248 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Genuine Goodman 0130F00008S Hot Surface Ignitor

The Goodman 0130F00008S is a factory OEM hot surface ignitor (HSI) engineered for the WGFD293090V5DAB gas furnace and compatible Goodman/Amana models. When the thermostat calls for heat, the control board energizes this ignitor; it glows red-hot to light the burners, then continues monitoring the ignition sequence. A failed or cracked ignitor is the single most common cause of no-heat furnace calls.

This OEM ignitor delivers the correct resistance, glow temperature, and mounting geometry your furnace's control board expects, so ignition is fast, consistent, and reliable through cold-weather cycling.

Specifications

OEM Part Number: 0130F00008S
Brand: Goodman (also fits Amana)
Component: Hot surface ignitor (HSI)
Element: Durable silicon nitride-style igniter
Equipment Type: Gas furnace
Primary Fit: WGFD293090V5DAB

OEM vs. Generic

Universal ignitor kits require splicing wires and choosing an adapter bracket — a frequent source of misalignment and premature failure. The genuine Goodman 0130F00008S is a true plug-and-play replacement with the factory connector and bracket, protecting the fragile igniter tip from stress cracks and giving you full OEM service life.

Installation Difficulty

Moderate (2 of 5). Turn off power AND gas at the furnace. Remove the burner-compartment door, unplug the ignitor connector, and unscrew the mounting screw. Install the new ignitor without touching the glow element with bare fingers — skin oils shorten its life. Reconnect, reassemble, and test for a clean ignition cycle. Typically 15–25 minutes.

Genuine OEM ignition performance. In stock and ready to ship.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WGFD293090V5DAB — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WGFD293090V5DAB — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WGFD293090V5DAB — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu