What igniter fits my Goodman furnace?

The correct replacement for Goodman model WGFD293070V4CAB — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WGFD293070V4CAB — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for WGFD293070V4CAB — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for WGFD293070V4CAB — 0130F00008S
Brand: Goodman
SKU: GOODMAN-14226
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-14226 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 0130F00008S Hot Surface Ignitor (HSI) is the genuine OEM ignition component for the WGFD293070V4CAB gas furnace and related Goodman/Amana models. When the thermostat calls for heat, this igniter glows to the precise temperature needed to light the burners on every cycle. A failed or cracked igniter is the single most common cause of a furnace that clicks but never fires.

Specifications

OEM Part Number: 0130F00008S
Brand: Goodman (fits Amana equivalents)
Component Type: Hot surface ignitor
Element: Durable silicon-nitride style igniter
Equipment: High-efficiency gas furnace
Primary Fit: WGFD293070V4CAB

OEM vs. Generic

Generic igniters often use brittle silicon-carbide elements with mismatched resistance, causing slow warm-up, no ignition, or premature failure. This OEM 0130F00008S delivers factory-spec resistance and a rugged element for consistent light-off and long service life — the smart choice for a repair you don't want to redo next season.

Installation Difficulty

Moderate (2/5) — Turn off gas and power at the furnace, unplug the igniter connector, remove the mounting screw, and swap in the new unit without touching the fragile element with bare fingers. Most homeowners complete the job in 20–30 minutes. Verify model compatibility before ordering.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WGFD293070V4CAB — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WGFD293070V4CAB — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WGFD293070V4CAB — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu