What igniter fits my Goodman furnace?

The correct replacement for Goodman model WFM18070S3AXCC — 20165703S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFM18070S3AXCC — 20165703S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this ignitor compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for WFM18070S3AXCC — 20165703S

Name: OEM Goodman Hot Surface Ignitor for WFM18070S3AXCC — 20165703S
Brand: Goodman
SKU: GOODMAN-14069
Price: 47.95 USD
Availability: InStock

SKU: GOODMAN-14069 Brand: Goodman

$47.95 $63.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

The Goodman 20165703S Hot Surface Ignitor (HSI) is a genuine OEM silicon-nitride ignitor built for the Goodman WFM18070S3AXCC furnace and compatible models. On a call for heat, the control board energizes the ignitor until it glows, lighting the burners. A cracked or worn ignitor is the leading cause of no-ignition and no-heat furnace failures.

Silicon-nitride ignitors are more durable and shock-resistant than older silicon-carbide styles, offering longer service life.

Specifications

OEM Part Number: 20165703S
Part Type: Hot surface ignitor (HSI)
Element: Silicon nitride
Voltage: 120V
Brand: Goodman
Equipment: Gas Furnace
Fits Model: WFM18070S3AXCC
Fit: Direct OEM replacement with factory connector

OEM vs. Generic

OEM Goodman ignitors ship with the correct bracket, connector, and resistance for a plug-and-play fit and reliable ignition timing. Generic universal HSIs require adapter harnesses and may not seat correctly in the burner assembly. OEM guarantees proper positioning and glow characteristics.

Installation Difficulty

Easy to Moderate — one or two screws and a single plug connector. Handle the fragile element by the bracket only — never touch the ceramic. Shut off power and gas before servicing.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$47.95

Frequently Asked Questions

Does this Ignitor fit my Goodman WFM18070S3AXCC — 20165703S?

Yes. This is the factory-specified OEM ignitor for the Goodman WFM18070S3AXCC — 20165703S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the ignitor on my Goodman WFM18070S3AXCC — 20165703S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this ignitor compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman ignitor?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu