What igniter fits my Goodman furnace?

The correct replacement for Goodman model WFD195045S3BAB Furnace — 0130F00008S is this exact part. It is the factory-specified replacement with exact OEM specifications. Using a part with different specifications can cause equipment damage or void your warranty. You can verify this by checking the data plate on your Goodman equipment which lists the model number WFD195045S3BAB Furnace — 0130F00008S.

My furnace will not ignite. What part is bad?

A furnace that will not ignite after the draft inducer runs typically has a failed igniter. The hot surface igniter should glow bright orange within 60 seconds. If it does not glow at all, it is cracked or burned out. If it glows weakly, it is degrading and should be replaced preventively. Average lifespan: 3 to 7 years.

Is this igniter compatible with Bryant or Payne systems too?

Many Goodman parts are cross-compatible with Bryant and Payne systems since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across multiple brand labels with different model numbers. To verify cross-compatibility, check your Bryant or Payne equipment service manual for cross-compatible part numbers, or contact info@nationalhvacparts.com with your model number for confirmation.

IMAGE COMING SOON

Goodman

OEM Goodman Hot Surface Ignitor for WFD195045S3BAB Furnace — 0130F00008S

Name: OEM Goodman Hot Surface Ignitor for WFD195045S3BAB Furnace — 0130F00008S
Brand: Goodman
SKU: GOODMAN-13927
Price: 76.95 USD
Availability: InStock

SKU: GOODMAN-13927 Brand: Goodman

$76.95 $99.95

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014

SAM.gov Registered

Govt POs Accepted

Goodman 0130F00008S Hot Surface Ignitor

The Goodman 0130F00008S is a genuine OEM hot surface ignitor (HSI) built for the WFD195045S3BAB gas furnace. This ignitor glows red-hot on a call for heat to light the main burners, making it one of the most critical — and most frequently replaced — components in a modern furnace. If your furnace clicks and the inducer runs but the burners never light, a cracked or worn ignitor is the most common culprit. Installing the correct OEM ignitor restores fast, reliable ignition and prevents repeated hard-start wear on the control board.

Specifications

Part type: Hot surface ignitor (HSI)
Function: Direct burner ignition on heat call
Compatible model: WFD195045S3BAB (and select Goodman/Amana furnaces)
Element: Durable ignitor element with factory-matched mounting bracket
Connection: OEM plug/harness fit

OEM vs. Generic

The OEM 0130F00008S comes with the correct bracket, gasket, and wiring plug for a true plug-and-play install. Universal ignitors require splicing, adapter brackets, and careful positioning — and mismatched resistance can shorten lifespan. OEM ensures correct heat-up timing and long service life.

Installation Difficulty

Moderate (2/5) — Requires removing the burner-compartment door, unplugging the harness, and unscrewing the ignitor bracket. Handle the fragile element by the base only. Cut power and gas first; about 20–30 minutes for most homeowners.

Shipping Information

Orders placed before 3PM CST ship same business day
Standard delivery: 2-5 business days
Express shipping available at checkout
Free shipping on orders over $75
Tracking number emailed upon shipment

Return Policy

30-day returns on unused parts in original packaging
Electrical parts (capacitors, contactors, control boards) are final sale once installed
Email info@nationalhvacparts.com to initiate a return
Refunds processed within 5-7 business days

OEM Goodman Hot Surface Ignitor ...

$76.95

Frequently Asked Questions

Does this Igniter fit my Goodman WFD195045S3BAB Furnace — 0130F00008S?

Yes. This is the factory-specified OEM igniter for the Goodman WFD195045S3BAB Furnace — 0130F00008S. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.

How do I replace the igniter on my Goodman WFD195045S3BAB Furnace — 0130F00008S?

Difficulty: Medium (20–30 min)
Step 1: Turn off power and gas. Step 2: Open furnace panel. Step 3: Locate igniter near burners. Step 4: Disconnect two-wire plug. Step 5: Remove mounting screw. Step 6: Install new igniter — do NOT touch element with fingers. Step 7: Reconnect, close panel, restore power/gas.

My furnace won’t ignite. What part is bad?

Furnace won’t ignite after the draft inducer runs = failed igniter. The hot surface igniter should glow bright orange within 60 seconds. No glow = cracked/burned out. Weak glow = degrading. Average lifespan: 3–7 years. Replacement: $15–$40 DIY.

Is this igniter compatible with Bryant or Payne too?

Many Goodman parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.

Should I use OEM or aftermarket for my Goodman igniter?

OEM recommended for reliability and warranty compatibility. OEM parts match exact factory specifications for proper fit, performance, and safety. While aftermarket alternatives cost less upfront, the risk of improper fit and reduced lifespan usually makes OEM the better value long-term.

How fast does National HVAC Parts ship?

Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.

Menu